Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 9
  • Total: 9
  • Baidu (2)

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Darelin pin

Started by smithy123, May 08, 2022, 03:17:15 PM

Previous topic - Next topic

smithy123

Hi all, can anyone shed any light on derelin pins and the best way to polish one up? I have Air coming out the porting in the barrel which is making me think that the derelin pin isn't seating right it was fine last night then this morning re stripped it and it's not holding air when rebuilt!

Thank in advance

Ca_Varminter

I assume you mean the Delrin Valve-body and the main valve stem..

You will need to pull the valve assembly out.
Inspect the sealing area on the Delrin(Acetal) valve-body.. for debris, nicks or scratches


For minor damage you can use very fine sandpaper and a little polishing compound on a rag..
Chuck the Valve-body in a drill and spin it up to polish!
Also check the valve-stem is straight too!

Finally check, the large O-ring/s on the Valve-body for any damage... lube it before when you reassemble..
Also clean the O-ring seal surface in the Rapid receiver. Make it is free of any debris and dry lube!!

Good Luck,
Stuart

nevadacowboy

If you need them new valves and stems are available from @DrBob and they come with all necessary o rings.
Bob
Once a Sapper always a Sapper

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.