Diy modifications

[Maxwell]

Are there any basic diy mods you can carry out yourself to improve the prformance of your rapid

[Maxwell]

No replies,  ive polished the hammer and hammer spring, thought there would of been other bits and pieces I  could of done to improve the gun not interested in any thing that ups the power as gun is sub 12 and want it to stay that way

[KCE]

Hi Maxwell,
Have you had a look in the airgun data section on here there is a lot of info regarding the service of a rapid from  the trigger units to your reg and valve.
Have a look im sure you will find much info on there.
Regards Kev.

[KevG]

If it's a mk1 gamo trigger model it can be worth giving the trigger sears a polish.tooth paste and your finger tips can do the job.
KevG

[KevG]

Realy it depends on your idea of diy.if you have a lathe and half a brain you  an make more or less anything.if not just simple polishing and setting the guns balance up can work wonders
KevG

[Daztilley]

If it's an early mk1 with the non adjustable bolt - you can now replace it with a later type adjustable bolt - to make it easier to adjust the probe and get a good probe to barrel seal 👍 DR BOB makes them 👍😎👍