Advice needed

[Gary35]

Hello all I have a early mk1 rapid 7 I fitted a new barrel from another rapid but as im trying to load the gun the pellet probe will not push all the way and stops before I can fully load it any help would be much appreciated thanks

[Ca_Varminter]

I the Barrel fully seated in the channel??
Here is one of my Tech post on how to install a barrel on a MKII.
Same principles apply.....
https://rapidforum.co.uk/forum/index.php?topic=408.0

Good Luck,
Stuart

[angrybear]

Hello all I have a early mk1 rapid 7 I fitted a new barrel from another rapid but as im trying to load the gun the pellet probe will not push all the way and stops before I can fully load it any help would be much appreciated thanks

Obvious question is it the same calibre ? if gone down in cal you need to change the pellet probe.
if the same cal & the bolt wont close in the gate you need to adjust the bolt/probe, if you have the adjustable bolt with a screw, remember the tiny lock grubscrew in the side