Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 63
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 34
  • Total: 34
  • Google (2)

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Hammer adjustment screw

Started by Deckchair, February 25, 2021, 04:32:36 PM

Previous topic - Next topic

Deckchair


Dr Bob


There were complaints ( from the usual suspects) that the adjuster in the back of the Vendetta's were a tad sloppy this was NOT under spring tension ...So I had 100 made .03 mm oversize and supply them with the action free of charge. Guy complained that it wasn't right that a standard one didn't fit even though he'd been given one. It cost me over £400 to get the oversize ones made.

I can turn the oversize one down to fit the standard one in a jiffy.

Bob


Personal Order`s & Questions Phone 07970714772

To place an order,

Please contact me on my personal e-mail address on this site or ask questions in my dedicated forum,

Thankyou

Dr.Bob,

KevG

even same on some of the genuine theoben blocks and plugs bob.some fit different to others.
KevG
Regards KevG.
Administrator

Dr Bob

That will be all my fault too then😆😆😆


Personal Order`s & Questions Phone 07970714772

To place an order,

Please contact me on my personal e-mail address on this site or ask questions in my dedicated forum,

Thankyou

Dr.Bob,

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.