Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 1
  • Guests: 3
  • Total: 4
  • maxtich
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Refurbishing a buddy bottle

Started by nevadacowboy, October 27, 2020, 03:34:20 PM

Previous topic - Next topic

nevadacowboy

I have just picked up a MFR 280 buddy bottle complete with valve.  It is a bit rough and I would like to take it back to the bare metal and then paint it. What is the best way to remove all the old covering.
Bob
Once a Sapper always a Sapper

Bearded Sniper

They look powdercoated to me, its quite thick when it chips off.
I'd say heat if it was being stripped down, but how much I wouldn't know

Ca_Varminter

Nope....
Take a look at Luxfer's site.
They recommend No baked on finishes!!
It can compromise the the integrity of the Bottle!!
https://www.luxfercylinders.com/support/temperature-exposure

Stuart

Bearded Sniper

Quote from: Ca_Varminter on October 27, 2020, 05:33:22 PM
Nope....
Take a look at Luxfer's site.
They recommend No baked on finishes!!
It can compromise the the integrity of the Bottle!!
https://www.luxfercylinders.com/support/temperature-exposure

Stuart
Don't suppose they say what they are coated with then? Is it just paint? I've wondered this myself in the past

Ca_Varminter

My early ball-bearing valve bottles had slight paint runs on them.....
So probably a good Epoxy type of Paint!

Stuart

nevadacowboy

I still want to know the best method to strip a bottle back to the bare ally



Bob
Once a Sapper always a Sapper

Ca_Varminter

#6
Quote from: nevadacowboy on October 27, 2020, 11:06:38 PM
I still want to know the best method to strip a bottle back to the bare ally
Follow my link to Luxfer site....
There is also an article about stripping...
They recommend non-caustic/etching paint remover
https://www.luxfercylinders.com/support/paint-strippers-for-aluminum-cylinders
They also recommend plastic bead blasting.....not glass, oxide, or sand blasting....

Stuart

nevadacowboy

Thanks for the link, tells me what I need to know.
Bob
Once a Sapper always a Sapper

Maxwell

What are you going to use to refinish the bottle are you going to prime it then paint it or powder coat it

nevadacowboy

I have rubbed it down and painted it with auto spray paint. It has given me an acceptable finish.
Bob
Once a Sapper always a Sapper

Daztilley

Thats what I normally do mate - using satin black spray paint 👍

Looks good if you make sure not to get any runs in the paint
Regards Daztilley
Moderator

Maxwell

Do you etch primer the bottle first

Ca_Varminter

As above about Stripping the Paint...
Non-etching Primer is Strongly recommended

Stuart

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.