Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Robs5230 on September 14, 2020, 04:00:54 PM

Title: 400cc bottle - How heavy ?
Post by: Robs5230 on September 14, 2020, 04:00:54 PM
Now looking at another bottle after realising just how heavy the 400cc bottle are.
According to Best Fittings info, there's around 300g between the 280 and 400cc.

No wonder this rifle feels like a lump.
Title: Re: 400cc bottle - How heavy ?
Post by: hoof hearted on September 14, 2020, 08:34:25 PM
Just checked 400cc is 692g charged 280cc is 550cv

hoof
Title: Re: 400cc bottle - How heavy ?
Post by: KevG on September 14, 2020, 08:40:56 PM
I prefer the 280 cc or even the 200cc bottles.improves the ballance no end.
KevG
Title: Re: 400cc bottle - How heavy ?
Post by: Mickyd on September 23, 2020, 05:41:44 PM
I've a 280 and 200cc that I use on my rapid, I'm getting a f a c rapid soon is it possible to get a 400cc carbon one for it. Md
Title: Re: 400cc bottle - How heavy ?
Post by: Brooksy on September 23, 2020, 06:17:50 PM
480 cc Mick, and they're 62 mm diameter, slightly more than the 400 aluminium.
Title: Re: 400cc bottle - How heavy ?
Post by: Mickyd on September 23, 2020, 07:56:02 PM
Thanks for the reply brooksy. Md
Title: Re: 400cc bottle - How heavy ?
Post by: Squinty on September 23, 2020, 08:03:57 PM
If you can find one...480cc Inocom bottle. Same as fitted to Daystate / FX / RAW
The neck is a little longer but essentially the dimensions are the same as a 400cc aluminium bottle
A&M may still have some in stock.

After using these I forgot just how much the balance changed until I got my .20cal mk1 with aluminium 400

(https://i.imgur.com/tjEFjvt.jpg)

much better balance for my .177 with 19" barrel

(https://i.imgur.com/4HCB4Fz.jpg)

No weight advantage from the BF bottles compared by capacity for non-reg/ standard reg pressures ie under 220bar but they are 300bar rated....assuming you can fill that high or the HP side your reg doesn't give up. ;D

excuse the dark picture,
the 400 is an old 200 bar bottle, new 250bar Luxfor bottles are noticeably heavier
280 and 200 are 232 bar.

(https://i.imgur.com/mjFzw2b.jpg)



Title: Re: 400cc bottle - How heavy ?
Post by: Robs5230 on September 24, 2020, 07:25:33 AM
Quote from: Squinty on September 23, 2020, 08:03:57 PM
If you can find one...480cc Inocom bottle. Same as fitted to Daystate / FX / RAW
The neck is a little longer but essentially the dimensions are the same as a 400cc aluminium bottle
A&M may still have some in stock.

After using these I forgot just how much the balance changed until I got my .20cal mk1 with aluminium 400

(https://i.imgur.com/tjEFjvt.jpg)

much better balance for my .177 with 19" barrel

(https://i.imgur.com/4HCB4Fz.jpg)

No weight advantage from the BF bottles compared by capacity for non-reg/ standard reg pressures ie under 220bar but they are 300bar rated....assuming you can fill that high or the HP side your reg doesn't give up. ;D

excuse the dark picture,
the 400 is an old 200 bar bottle, new 250bar Luxfor bottles are noticeably heavier
280 and 200 are 232 bar.

(https://i.imgur.com/mjFzw2b.jpg)
I thought I'd read correctly about the weights.
cheers
Mines off now and tube fed