Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Minty on September 12, 2020, 08:49:41 AM

Title: Sportsmatch Tmb3 Rapid mounts
Post by: Minty on September 12, 2020, 08:49:41 AM
Hi

Does anyone know if the above mounts bolt directly to the rapid block like the originals please? I have tried to find out but without luck. Reason I'm asking is Sporting Targets website says they are for weaver rails. Sportsmatch's website announced they had made new mounts to fit directly to the Rapid but that was 2014 in their news bit and I can't see any info since so I'm hoping these are the ones.

Thanks

Mark.
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: Topsparx1 on September 12, 2020, 10:03:37 AM
The Sportsmatch TMB3 is for direct fixing to the block, they bolt through the bottom ring with a small  Allen key bolt. These are for a 30mm scope tube. Very good mounts IMHO 👍🏻
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: Remchester on September 12, 2020, 10:15:07 AM
You will need the fixing bolts if you dont have them bud I've just fitted a set on my mk2 they are high quality mounts
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: Minty on September 12, 2020, 06:19:57 PM
That's great guys, thanks for your help it's appreciated 👍🏻

All the best

Mark
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: bob4026 on September 13, 2020, 03:56:17 PM
Quote from: Remchester on September 12, 2020, 10:15:07 AM
You will need the fixing bolts if you dont have them bud I've just fitted a set on my mk2 they are high quality mounts

Hi mate,

I take it the standard bolts don't fit? Just asking as i'm hoping to pick some mounts up to fit a 30mm tube to my mk2... don't want to think i'm there only to be foiled at the last moment.

atb

Bob
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: Remchester on September 13, 2020, 07:06:02 PM
Quote from: bob4026 on September 13, 2020, 03:56:17 PM
Quote from: Remchester on September 12, 2020, 10:15:07 AM
You will need the fixing bolts if you dont have them bud I've just fitted a set on my mk2 they are high quality mounts

Hi mate,

I take it the standard bolts don't fit? Just asking as i'm hoping to pick some mounts up to fit a 30mm tube to my mk2... don't want to think i'm there only to be foiled at the last moment.

atb

Bob

If you have the standard theoben Allen's that came in the mounts on the rifle they fit buddy I was saying as they dont come with any if you didn't have any on hand👍👍
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: bob4026 on September 13, 2020, 07:51:35 PM
Ahh, i see. Yeah i got the originals still. Cheers for the heads-up

Bob
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: bob4026 on September 19, 2020, 04:25:21 PM
Right, so i got the mounts, and very nice they are too.... however - yes, there's always a however. Gotta use the single shot option (not that i'm overly fussed with that) as the mag won't fit in that gap thats left.

So here's me question, do they do these in different heights? The packet doesn't state what height they are.

Cheers all...

Bob
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: Remchester on September 20, 2020, 01:09:23 PM
Mine fits a mag? Are they the right way round?
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: bob4026 on September 20, 2020, 05:12:26 PM
Yeah, there isn't enough height to get the mag in underneath the scope.

I'll try to do a foto... bear with me - proper luddite, me.

Bob
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: Ca_Varminter on September 20, 2020, 05:51:27 PM
Well without enough height....
You need a set of Riser blocks...
(https://photos.imageevent.com/scl_electronics/gun/air/websize/30mm-riser.jpg)
here is may standard riser blocks under the 30mm rings..
it works... but I made a wider set, just to look good.....

Stuart
Title: Re: Sportsmatch Tmb3 Rapid mounts
Post by: hunter on October 03, 2020, 08:08:39 PM
How high are these tmb3 mounts
are they the same height as the standard rapid mounts meaning  they'll take a 50 mm scope  ( 3-10 x50 wtc )  without needing risers