a bloke came down today wanting a service on his fac rapid.mk2 type block.he bought it of a guy who bought direct from theoben.this gun had a standard slip on evo vortex silencer fitted.on removing the silencer I was gob smacked.the barrel had been previously screw cut but the end of the barrel had been snaped of were the thread relief goes.it was not a clean break but angled.the new owner as never removed the silencer so was unaware of the damage.now the mystery is he said the gun grouped bang on out to his 65 yrd zero.just for the life of me I don't know how it managed to shoot straight and true.he is a seasoned shooter hunter so knows the crack.
KevG
Looking at the first photo...
The Crown of the barrel seems to be recessed from the broken front portion.
The rifling seems sharp.... i
Is it cut true to the Bore?
But what happen to the barrel itself?
I know Theoben did barrels for the US market, with snap-ring groove.
So the Evo-Vortex was Permanantly attached......
Stuart
That looks like it is unfinished strange how it performs very well.
You have seen many barrels over the years KevG so it must be a rare one for you.
Regards Kev.
hard to tell in the pics but the crown was totally Knackered.was well of centre to.dont know were the broken bit went as that was already missing.no it wasn't a snap ring.ive seen those before.those were normally for the un threaded barrels.must have been done after leaving theoben.it was a genuine theaben walther barrel with the calibre and fac stamp..only thing I can think is that a screw cut silencer as got stuck and with the thread relief being to deep the weakened end as twisted of.
KevG
For it to be shooting that accurate... I bet that recessed crown must be in pretty good shape..
But that is Still a Ugly looking machine job and Break!!!!!
Stuart
Judging by the burr, I reckon that's been sawn off with a mini grinder. Maybe it was fitted with a barrel weight, then somebody changed their mind and fitted a push on silencer. The option of buying a Rapid with a barrel weight was there originally even for the home market.
no it was definitely threaded..on close inspection it looks like its been snaped by twisting.
KevG
Must have had hands like king Kong to twist that bugger off!🤣🤣
Can almost see the lad with a pair of stilsons in his hand giving it some.
Some folk should Just leave things well alone...
Bob
Thats mad Kev and its still accurate :o
Wouldn't want an arm wrestle with the bloke or his mitts round my neck! Must have had some tension on snapping that off! 💪
That's mad kev lol it still looks like crown is ok is it as its recessed inside barrel
no the crown was bad.you can not see in the pictures.
KevG
My god, I bet you was shocked at that Kev. If it's been snapped off my god there has been some force/pressure applied to do so. I bet now you've sorted it the owner will be over the moon with how it shoots
don't know how it shoots as yet as he as not tryed it out.hope to God I have not mended it worserer ;D
KevG
what you done Kev re crowned and unf thread
no re crowned and slip on m8.
KevG