Print Page - Underpowered mk1 rapid

Title: Underpowered mk1 rapid
Post by: GB2017 on September 01, 2020, 02:30:22 PM

Hi All

just chrono'd a recently acquired rapid and it is pumping out circa 9.6 ft/lbs at 150bar however with a very reasonable spread of +/- 5fps

any ideas as to why it would be low and what can be done to resolve it

thanks in advance

atb

Title: Re: Underpowered mk1 rapid
Post by: KevG on September 01, 2020, 02:33:47 PM

what rapid is it.may just be as simple as using the hammer pre load a little
KevG

Title: Re: Underpowered mk1 rapid
Post by: GB2017 on September 01, 2020, 03:41:03 PM

yes it was sir ::)

Title: Re: Underpowered mk1 rapid
Post by: Daztilley on September 01, 2020, 04:30:17 PM

Nice easy fix 👌

Title: Re: Underpowered mk1 rapid
Post by: GB2017 on September 02, 2020, 07:12:59 AM

thankfully yes and a nice little learning experience

Title: Re: Underpowered mk1 rapid
Post by: KCE on September 06, 2020, 10:36:37 PM

Nice to hear you got it sorted out m8.
Regards Kev.

Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: GB2017 on September 01, 2020, 02:30:22 PM