Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: GB2017 on August 01, 2020, 03:55:03 PM

Title: identifying barrels
Post by: GB2017 on August 01, 2020, 03:55:03 PM
Ok this might come in for the yearly prize of dumbest question yet  :o

but if I don't ask I don't win

can barrels be identified by manufacturer ie lw or annie and if so how

not asking about identifying calibre (not going for the dumb f***er of the century award.... not yet anyhow) just manufacturer
Title: Re: identifying barrels
Post by: Squinty on August 01, 2020, 05:18:53 PM
Yes, by the shape and number of grooves.
Title: Re: identifying barrels
Post by: GB2017 on August 01, 2020, 05:24:54 PM
Quote from: Squinty on August 01, 2020, 05:18:53 PM
Yes, by the shape and number of grooves.

thanks thats good to know, can you shed any more light / information that would help distinguish them?
Title: Re: identifying barrels
Post by: Squinty on August 01, 2020, 07:02:01 PM
you're welcome

wish I could help, haven't seen any comparison pictures since the old R7OC maybe 3 crashes prior to the new one.

LW is 12 groove- 60% lands, 40% groove (picture)

if I recall correctly Anschutz 10 groove, narrow ratchet lands - wide 'grooves'

BSA 12 groove 50/50 land -groove
Title: Re: identifying barrels
Post by: GB2017 on August 01, 2020, 08:02:27 PM
Quote from: Squinty on August 01, 2020, 07:02:01 PM
you're welcome

wish I could help, haven't seen any comparison pictures since the old R7OC maybe 3 crashes prior to the new one.

LW is 12 groove- 60% lands, 40% groove (picture)

if I recall correctly Anschutz 10 groove, narrow ratchet lands - wide 'grooves'

BSA 12 groove 50/50 land -groove

thanks so really it boils down to count 20 "bits" and its an anschutz, count 24 and its a lw or bsa, then stick it on the gun if I can hit stuff its a walther if I cant it's a bsa  :o
Title: Re: identifying barrels
Post by: Squinty on August 01, 2020, 09:18:11 PM
Something along those lines.

BSA barrels were the upgrade compared to some that were on Rapid, done right they could be real tack drivers. Plus they'll be 15.5mm o/d and sleeved at the breech
Title: Re: identifying barrels
Post by: GB2017 on August 02, 2020, 07:37:55 AM
Quote from: Squinty on August 01, 2020, 09:18:11 PM
Something along those lines.

BSA barrels were the upgrade compared to some that were on Rapid, done right they could be real tack drivers. Plus they'll be 15.5mm o/d and sleeved at the breech


It's interesting from the reading I have done so far aside from my jokey comment I think that the bsa barrels just seem to be somewhat hit or miss quality wise whereas the anschutz / lw seem to more on the money.

Also you have given another differential if the bsa's are 15.5 then that takes the barrel I have out of the running for being a bsa as its over that

many thanks