Text only | Text with Images

Theoben Rapid Forum

Everything Technical About Rapid => Technical => Topic started by: Ca_Varminter on July 21, 2020, 04:54:22 AM

Title: All my Rapid Technical Posts.
Post by: Ca_Varminter on July 21, 2020, 04:54:22 AM
This is a Sticky Post of the list of all my technical Post I have done here.....

1. A photo spread of all the main triggers used in the Rapid MK I and MK II
:) :) :) https://rapidforum.co.uk/forum/index.php?topic=83.0


2. The Rapid Adjustable Bolt Disassembly.
;) ;) ;) https://rapidforum.co.uk/forum/index.php?topic=238.0


3. Rapid MK II Sporter trigger adjustment(tear-drop safety knob)
:D :D :D https://rapidforum.co.uk/forum/index.php?topic=275.0


4. Rapid MK II Mark4 trigger adjustment
;D ;D ;D https://rapidforum.co.uk/forum/index.php?topic=272.0


5. How to Disassemble and Adjust your 12-shot Mag (OEM or Dr Bob's)
>:( >:( >:( https://rapidforum.co.uk/forum/index.php?topic=237.0


6. How to remove and re-install your Rapid MK II Barrel
:( :( :( https://rapidforum.co.uk/forum/index.php?topic=408.0


7. How I installed RAW and Dr Bob's Quick-Fills
:o :o :o https://rapidforum.co.uk/forum/index.php?topic=185.0


8. Destructive Titanium Airtube Testing (by Chip Smith)
8) 8) 8) https://rapidforum.co.uk/forum/index.php?topic=204.0


9. How  to Lap your Outer Probe to Seal Properly to your Barrel
??? ??? ??? https://rapidforum.co.uk/forum/index.php?topic=935.0

10. Video of the Comparison of KevG DoubleTap Inertia Weight Design with the Theoben Inertia weight
::) ::) ::) https://rapidforum.co.uk/forum/index.php?topic=1111.0

11. How to make Your Own Pellets...Swaging Slugs! with videos...
:P :P :P https://rapidforum.co.uk/forum/index.php?topic=1740.0

12. Tool to help installing the Tail O-ring on a Valve-Body
:-[ :-[ :-[ https://rapidforum.co.uk/forum/index.php?topic=1973.0

13.How to Smooth out Your Bolt Lock-Up!
 :-X  :-X  :-X https://rapidforum.co.uk/forum/index.php?topic=1192.0

Hope this help All the Rapid lovers here!
Stuart
Title: Re: All my Rapid Technical Posts.
Post by: GB2017 on July 21, 2020, 08:02:39 AM
Very helpful thanks

Now can you do one on how to teach my pellets not to socially distance, mine seem to be all scared of catching covid  ;)
Title: Re: All my Rapid Technical Posts.
Post by: kjc on July 21, 2020, 08:54:17 AM
Thanks very much, will come in handy when I get my MFR.
Title: Re: All my Rapid Technical Posts.
Post by: jps on September 15, 2020, 04:44:48 PM
Thank you for putting up your technical posts, very helpful indeed.  8)
Title: Re: All my Rapid Technical Posts.
Post by: Daztilley on September 16, 2020, 11:43:42 AM
Great info Stuart 👍
Title: Re: All my Rapid Technical Posts.
Post by: Vard on May 22, 2021, 02:14:13 PM
Thanks for sharing.
Have got to drill a stock to suit a dr Bob quick fill .Am using your ideas in tech thread as a basis/inspiration to make my own fixture to secure stock to whilst I do it.
Cheers.
Title: Re: All my Rapid Technical Posts.
Post by: Ca_Varminter on May 22, 2021, 03:58:44 PM
Hi Vard,
Glad My Tech Post helped!!
You need to post some photos of The results of your Quest
for the Perfect QF hole in your Rapid Stock!!

Good Luck,
Stuart
Title: Re: All my Rapid Technical Posts.
Post by: KevG on May 22, 2021, 04:32:11 PM
nice one stuart
KevG
Title: Re: All my Rapid Technical Posts.
Post by: steve1705 on December 28, 2021, 06:27:29 PM
Great info and the double tap thingy is definately an eye opener, is it for sub 12 only or would an FAC benifit from it.
Title: Re: All my Rapid Technical Posts.
Post by: Ca_Varminter on December 28, 2021, 11:35:36 PM
All Rapid will benefit from One of KevG's Double Tap Inertia Weight..
Even my 70 fpe Ul_Ti_Mate Rapid loves it ...

Stuart
Text only | Text with Images