Theoben Rapid Forum

DrBob`s products & parts => Dr Bob's Section => Topic started by: Topsparx1 on July 18, 2020, 01:50:46 PM

Title: 400cc Buddy Bottle Valve
Post by: Topsparx1 on July 18, 2020, 01:50:46 PM
Hey Dr Bob, I've just received my bottle valve I ordered through eBay, so thanks for that 👍🏻.
When I fit this into my bottle do I need to use any PTFE tape, threadlock, jointing paste etc or do I just screw it in dry as it is 😳
Title: Re: 400cc Buddy Bottle Valve
Post by: Ca_Varminter on July 18, 2020, 02:36:03 PM
Nothing on the threads...Dry!!!
But a thin film of Molykote 33 or silicone grease on the O-ring!

Good Luck,
Stuart
Title: Re: 400cc Buddy Bottle Valve
Post by: Topsparx1 on July 18, 2020, 03:26:49 PM
Excellent thanks Stuart 👍🏻