Theoben Rapid Forum
Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: GB2017 on July 13, 2020, 09:55:27 AM
Morning All
Been having a chat with the helpful chaps at CS regarding a stock.
My question to those that might know, is I would like to have quickfill as an option on the gun mechanism and apparently CS only cater understandably for the theoben default cutout. So what quickfill options are available for this? is it a specific model of rapid I need to aim for, will Dr Bob's stuff work or is that in a different location to the "default" so would require extra work on the cs stock,
thanks in advance
as an after thought what rapid model came with the quickfill as a default?
CS probably cut them to suit tbe Mk2/ Impact / RAW 90* V.
No idea if Bob's QF has the same position.
Simple answer No....
Here is my post on installing both QF kits....
https://rapidforum.co.uk/forum/index.php?topic=185.0
Here is a photo of my drilling fixture..
The hole furthest left is for Dr Bob's QF
(http://photos.imageevent.com/scl_electronics/gun/qf/websize/14336976355061.jpg)
Stuart
Quote from: Ca_Varminter on July 13, 2020, 02:33:34 PM
Simple answer No....
Here is my post on installing both QF kits....
https://rapidforum.co.uk/forum/index.php?topic=185.0
Here is a photo of my drilling fixture..
The hole furthest left is for Dr Bob's QF
(http://photos.imageevent.com/scl_electronics/gun/qf/websize/14336976355061.jpg)
Stuart
Saw this, but I have 2 left feet.........
as hands