A lovely rig..
A very nice clean original rapid.
looks mint and I like the silencer looks very well.
Regards kev.
Thanks 8)
The carbon moderator is a 'Steve Pegg'
As quiet as a quiet thing! Seriously good..
Superb bit of kit Anthony 8)
Thanks Simon :)
The 'Elan' will soon be unveiled 8)
Nice looking gun that m8.
KevG
Quote from: Shoto1 on June 30, 2020, 06:49:06 PM
Thanks Simon :)
The 'Elan' will soon be unveiled 8)
Didn't know you wanted it back Anthony m8. ;D
KevG
Quote from: KevG on July 01, 2020, 10:43:15 PM
Quote from: Shoto1 on June 30, 2020, 06:49:06 PM
Thanks Simon :)
The 'Elan' will soon be unveiled 8)
Didn't know you wanted it back Anthony m8. ;D
KevG
I should have mentioned that part Kev ~ Lol ;D
wow that's looks like you just unboxed it Anthony, A stunning rifle all the very best with it!
Quote from: Scott on July 02, 2020, 09:54:22 AM
wow that's looks like you just unboxed it Anthony, A stunning rifle all the very best with it!
Many thanks Scott - best wishes to you and yours 8)
just done a full shot string on your Elan Anthony m8.got 97 shots from 200 bar fill.which is not bad for one of these in .177..no spike on open reg open of reg drop of.just gradual fall.with the 10.34 grn pellets.low 684 high 696.most falling between 688 and 691.
KevG
Good results there kev 👍👍👍
Quote from: KevG on July 02, 2020, 06:26:27 PM
just done a full shot string on your Elan Anthony m8.got 97 shots from 200 bar fill.which is not bad for one of these in .177..no spike on open reg open of reg drop of.just gradual fall.with the 10.34 grn pellets.low 684 high 696.most falling between 688 and 691.
KevG
That's great work Kev, I really appreciate the effort you have put into this.
Hope to catch up tomorrow Sir 8)
A cracking job there kevG and you know he will always have piece of mind now you worked on his gun.
Regards Kev.
Quote from: KCE on July 02, 2020, 07:11:56 PM
A cracking job there kevG and you know he will always have piece of mind now you worked on his gun.
Regards Kev.
Well said 👍
Tried to test for accuracy but can not get a stock to fit it.air tube is to big a diameter were it joins action.tryed shooting of knee with no stock(not to be recommended. ;D)and got half decent group.more or less same ftlb with 8.4 grn and 10.34 pellets which is good.just still trying to locate some mounts for it now
KevG
Quote from: KevG on July 02, 2020, 07:50:36 PM
Tried to test for accuracy but can not get a stock to fit it.air tube is to big a diameter were it joins action.tryed shooting of knee with no stock(not to be recommended. ;D)and got half decent group.more or less same ftlb with 8.4 grn and 10.34 pellets which is good.just still trying to locate some mounts for it now
KevG
I'm much obliged to you Kev 🥇😇
what mounts you need KevG.
Regards Kev.
Normal rapid mounts key m8
KevG
Will have a look and if I have some you can have them.
Regards Kev.