Hi just bought rapid mk2 late block with mk4 trigger with rowan ajustable trigger
I've found the safety doesn't engage and is very light let off to light and not much first stage anyone no the first stage second stage and sear engagement sequence so I can ajust so can get safety to work cheers
Have a look here.
https://rapidforum.co.uk/forum/index.php?topic=272.0 (https://rapidforum.co.uk/forum/index.php?topic=272.0)
Cheers pal just what I need thanks
Yes it sounds like your trigger was adjusted to be like a single stage trigger...
But if you try to adjust the trigger to shorten the 1st stage to be very short or eliminate it..
You will disable the safety!!
So Just follow my reset instructions....
You will get it back right!
Remember, when you play with the Trigger..Test, Test, Test, and TEST More!!!
Good Luck, and if you have any problem just let me know!
Stuart
Cheers so its 1st stage needs lengething to get safety to work again as I like quite long first stage then clean break but i bet second stage will need ajusting too think I'll back them all off start again
Still cant get safety to work but got nice 1st stage then clean break strange why safety not working maybe spring not there
Just getting my dinner daz but will phone you later on.it may be the counter sink screw as come loose that holds safety spring causing it to come out of operating position.
KevG
Once again this is why we set up this forum to also help others out in there hour of need.
Nice one guys.
Regards Kev.
Quote from: Dazgrif36 on June 28, 2020, 10:14:45 AM
Still cant get safety to work but got nice 1st stage then clean break strange why safety not working maybe spring not there
So after following my instructions, you still have no safety....
if no spring..The Safety will engage, but it won't be notchy
So pull the safety towards the trigger(engaged), you still can pull the trigger?
Stuart
Think he sorted it.was safety spring out of place
KevG
Thanks KevG,
That's great...Nothing Major!!
Stuart