Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Foxdropper2 on August 21, 2026, 01:24:33 PM

Title: .25 barrel for mk1 rapid fac
Post by: Foxdropper2 on August 21, 2026, 01:24:33 PM
Hi folks .
Any advice on what to get please and where plus who to do the work as my skills extend to pulling the trigger only  :)
Title: Re: .25 barrel for mk1 rapid fac
Post by: Brooksy on August 21, 2026, 02:31:19 PM
T W Chambers have .25 barrel blanks. No idea where you'll get it machined though, not in your area. Any good lathe shop should be able to do it by copying your existing barrel though.
Title: Re: .25 barrel for mk1 rapid fac
Post by: Therapidman on August 21, 2026, 04:14:30 PM
Alpha barrels are very good .. kevg can machine it .. hal who your to be on agf
Title: Re: .25 barrel for mk1 rapid fac
Post by: Foxdropper2 on August 22, 2026, 08:04:05 AM
Quote from: Therapidman on August 21, 2026, 04:14:30 PMAlpha barrels are very good .. kevg can machine it .. hal who your to be on agf
What's the reference to AGF please sir .
Title: Re: .25 barrel for mk1 rapid fac
Post by: Therapidman on August 22, 2026, 09:40:53 AM
Airgun forum
Title: Re: .25 barrel for mk1 rapid fac
Post by: maxtich on August 26, 2026, 03:22:02 PM
Quote from: Foxdropper2 on August 21, 2026, 01:24:33 PMHi folks .
Any advice on what to get please and where plus who to do the work as my skills extend to pulling the trigger only  :)

Have you been sorted for .25 barrel?
Title: Re: .25 barrel for mk1 rapid fac
Post by: Bigal. on August 29, 2026, 09:42:27 AM
I test a lad i not seen for years at home, he got a block of mine and testing his engineering wisdom on it.
He bought a 21in blank for a mint mk1. He going to do the trimming up to fit it on his gun. As a cnc lathe/milling machine,  I report in on it,
Kev will sort you out. ;)
Title: Re: .25 barrel for mk1 rapid fac
Post by: Foxdropper2 on August 30, 2026, 02:19:38 PM
Quote from: maxtich on August 26, 2026, 03:22:02 PM
Quote from: Foxdropper2 on August 21, 2026, 01:24:33 PMHi folks .
Any advice on what to get please and where plus who to do the work as my skills extend to pulling the trigger only  :)

Have you been sorted for .25 barrel?
No mate . Lot of time wasters tbh .
Title: Re: .25 barrel for mk1 rapid fac
Post by: angrybear on August 31, 2026, 11:41:34 AM
I had a 24" LW on my mk2 FAC, accurate but pellet fussy.
Bear in mind the twist rate if you want to use slugs.

While Kev would be my no 1 choice, any gunsmith should be able to machine it,
I'm pretty sure the blue print is in our technical files.
Title: Re: .25 barrel for mk1 rapid fac
Post by: maxtich on August 31, 2026, 04:17:58 PM
 Lot of time wasters tbh .

Can't seem to send you a message on here..
Can you send me a contact no or e-mail and we can have a chat.
Title: Re: .25 barrel for mk1 rapid fac
Post by: Kernal on August 31, 2026, 04:24:40 PM
Quote from: maxtich on August 31, 2026, 04:17:58 PMLot of time wasters tbh .

Can't seem to send you a message on here..
Can you send me a contact no or e-mail and we can have a chat.

Messaged KevG just now but he`s been in hospital hopefully he`s doing ok and will respond as soon as he can!