Theoben Rapid Forum

.22 Had this for some years now but hardly used it. Hoping to change all that though. Couple of questions what size is the buddy bottle and is the fill pressure 200 Bar?

Looks like a 400cc bottle, 60mm dia, 280cc are 50mm dia, it will say 0.4L in the stamping on the shoulder.
Yes, 200bar for a sub 12, should say so in that leaflet on the back page in blue printing  ;)

That looks to be a very early mk2 as it has the old style printing on the block, but mk2 stock & sporter trigger going by the safety button.

Very Nice MKII with the Tear=drop Sporter Trigger !!
Well since been in the Safe for a while....
You may need to do some Maintenance....change out the O-ring!
(https://photos.imageevent.com/scl_electronics/gun/air/websize/RapidOrings_1_.jpg)

Have Fun and Shoot Straight!
Stuart

Quote from: Ca_Varminter on June 03, 2026, 02:33:45 PMVery Nice MKII with the Tear=drop Sporter Trigger !!
Well since been in the Safe for a while....
You may need to do some Maintenance....change out the O-ring!
(https://photos.imageevent.com/scl_electronics/gun/air/websize/RapidOrings_1_.jpg)

Have Fun and Shoot Straight!
Stuart
[/qu

Quote from: Ca_Varminter on June 03, 2026, 02:33:45 PMThanks, I often took it out and fired a few shots to keep everything moving.
Very Nice MKII with the Tear=drop Sporter Trigger !!
Well since been in the Safe for a while....
You may need to do some Maintenance....change out the O-ring!
(https://photos.imageevent.com/scl_electronics/gun/air/websize/RapidOrings_1_.jpg)

Have Fun and Shoot Straight!
Stuart