Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Walk on April 29, 2026, 07:37:04 AM

Title: Removing PIP
Post by: Walk on April 29, 2026, 07:37:04 AM
Hi fellas on stripping a friends rifle looking at the pip on the hammer it looks shorter than others how long should it be he wants a silent pip fitted will the old one just screw out i have tried but seems like its fixed in also what size is the thread on the pip ? is it 2ba ? cheers fellas ATB  ;) 
Title: Re: Removing PIP
Post by: Ca_Varminter on April 29, 2026, 03:22:26 PM
The old pip is screw on.
But if original, the Pip is heavily Loctited on!!
So some heat will be needed to get the Pip off!!

Good Luck,
Stuart
Title: Re: Removing PIP
Post by: Walk on April 29, 2026, 05:51:23 PM
Hi i will give it a try ATB  :)  ;)
Title: Re: Removing PIP
Post by: angrybear on April 29, 2026, 11:42:16 PM
IIRC sub 12 pip's are 17mm, FAC pip's are shorter so they get more momentum, usually 10-12mm, but I've got one 5mm.
Title: Re: Removing PIP
Post by: Walk on April 30, 2026, 08:10:12 AM
Quote from: angrybear on April 29, 2026, 11:42:16 PMIIRC sub 12 pip's are 17mm, FAC pip's are shorter so they get more momentum, usually 10-12mm, but I've got one 5mm.
yes its around 10mm will that still be ok for a sup 12 ? cheers Buddy.
Title: Re: Removing PIP
Post by: Bigal. on April 30, 2026, 04:41:36 PM
Just balance the rest of the gun round it Phil.
Eg hammer spring pressure etc, ;) Al
Title: Re: Removing PIP
Post by: Walk on May 01, 2026, 08:01:21 AM
Cheers Al i have done that rifle running true now ATB Phil. :)  ;)
Title: Re: Removing PIP
Post by: Squinty on May 01, 2026, 09:02:37 AM
word of warning, check output at 120-140 bar, short pips can cause the power curve to rise as the pressure drops.
Title: Re: Removing PIP
Post by: Walk on May 07, 2026, 04:33:40 PM
Quote from: Squinty on May 01, 2026, 09:02:37 AMword of warning, check output at 120-140 bar, short pips can cause the power curve to rise as the pressure drops.

Cheers Fella  ;)