Text only | Text with Images

Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Walk on March 14, 2026, 12:11:20 PM

Title: MFR Trigger
Post by: Walk on March 14, 2026, 12:11:20 PM
Hi fellas as any one here fitted one of these Triggers to a mk11 or MFR if so what they like cheers ATB .

https://rowanengineering.com/collections/theoben
Title: Re: MFR Trigger
Post by: Ca_Varminter on March 14, 2026, 02:42:15 PM
Yes if your Trigger looks like this...Mark 4
(https://photos.imageevent.com/scl_electronics/gun/air/websize/Mark4-tirg1.jpg)
My design long before Rowan.....

It will NOT work with the early Mark 3 triggers.....TYPO ERROR!!!
Notice the External Safety, easy way to identify them!
(https://photos.imageevent.com/scl_electronics/gun/air/large/Mark%203%20trigger1.jpg)

I like my trigger because you place the trigger blade in the most comfortable position!

Stuart
Title: Re: MFR Trigger
Post by: Walk on March 14, 2026, 07:26:40 PM
yes i think it is i know its a MK4 trigger just need pin size i need to look into it a little more dose it matter what stock you have fitted cheers  ;)
Title: Re: MFR Trigger
Post by: Ca_Varminter on March 14, 2026, 08:13:51 PM
It shouldn't matter what stock you have......

Stuart
Title: Re: MFR Trigger
Post by: Walk on March 15, 2026, 04:26:54 PM
Quote from: Ca_Varminter on March 14, 2026, 08:13:51 PMIt shouldn't matter what stock you have......

Stuart
Cheers Buddy  :)  ;)
Text only | Text with Images