Theoben Rapid Forum

DrBob`s products & parts => Dr Bob's Section => Topic started by: Dr Bob on June 05, 2020, 11:18:32 AM

Title: Just in from Italy slimline bottom plugs
Post by: Dr Bob on June 05, 2020, 11:18:32 AM
As title.

Note the built in O ring
Title: Re: Just in from Italy slimline bottom plugs
Post by: Ca_Varminter on June 05, 2020, 02:32:02 PM
Very Nice Dr Bob!!
Love the intergral O-rings..No more Bonded washers!!
Glad you got those Photos UP!!
I might need to order a few for my Rapids....

Stuart
Title: Re: Just in from Italy slimline bottom plugs
Post by: KCE on June 05, 2020, 06:46:57 PM
Good to hear Dr Bob.
They do look the part neat and tidy.
Regards Kev.
Title: Re: Just in from Italy slimline bottom plugs
Post by: Vard on June 17, 2020, 10:09:17 AM
Quote from: Dr Bob on June 05, 2020, 11:18:32 AM
As title.

Note the built in O ring

Hello Bob,
How can i got hold of one of these plugs?
Thanks,
Vard
Title: Re: Just in from Italy slimline bottom plugs
Post by: Daztilley on June 17, 2020, 11:19:09 AM
The plug looks good 👍
Will give you a little bit more pre chamber too 😎
Title: Re: Just in from Italy slimline bottom plugs
Post by: daystatesniper on June 17, 2020, 12:51:09 PM
How are they tightened up in the block as not having a "bolt" head for a spanner ?

atvb' Mick
Title: Re: Just in from Italy slimline bottom plugs
Post by: Daztilley on June 17, 2020, 12:52:12 PM
Think it will be an allen key that you use to tighten it mate 👍
Title: Re: Just in from Italy slimline bottom plugs
Post by: Dr Bob on June 18, 2020, 03:21:13 PM

Messing with a bling bolt plate cover from shim stock too :D
Title: Re: Just in from Italy slimline bottom plugs
Post by: KCE on June 18, 2020, 03:33:00 PM
I'm sure you will get there Dr Bob.
That is a nice bit of bling is it a one off ?.
Regards Kev.
Title: Re: Just in from Italy slimline bottom plugs
Post by: Ca_Varminter on June 18, 2020, 03:44:03 PM
Hey Dr Bob,
I never notice the Countersunk on the trigger pin holes!!
I was just about to do that on my Chip Ti. receiver!!

So are going to release those neat bottom plug for Sale...
Or are only for the Vendetta right now!

Stuart
Title: Re: Just in from Italy slimline bottom plugs
Post by: Dr Bob on June 18, 2020, 03:45:37 PM
If I can get the laser to engrave a hunting scene on it no I'll do a few. Too  much yellow in one place. Here's one that was Martin444s idea.
Title: Re: Just in from Italy slimline bottom plugs
Post by: Dr Bob on June 18, 2020, 03:46:51 PM

No the forum members can have them for£5.00

Bob
Title: Re: Just in from Italy slimline bottom plugs
Post by: Dr Bob on June 18, 2020, 03:49:06 PM
The slimline plugs I mean not the plates
Title: Re: Just in from Italy slimline bottom plugs
Post by: Therapidman on June 18, 2020, 03:51:51 PM
Always coming up with new ideas
Title: Re: Just in from Italy slimline bottom plugs
Post by: KCE on June 18, 2020, 04:19:30 PM
will they fit the MK1 block Dr Bob.
If they do I would like to order one with hunting scene on.
Regards Kev.
Title: Re: Just in from Italy slimline bottom plugs
Post by: Vard on June 25, 2020, 06:39:12 PM
Quote from: Vard on June 17, 2020, 10:09:17 AM
Quote from: Dr Bob on June 05, 2020, 11:18:32 AM
As title.

Note the built in O ring

Hello Bob,
How can i got hold of one of these plugs?
Thanks,
Vard

Got from  you via eBay . Turned up today and all good thanks.Used on an impact block which had an odd plug on it with a dowty washer. This is much better as the one that was fitting was too deep. better option than deepening the inletting on the stock.
Title: Re: Just in from Italy slimline bottom plugs
Post by: Ca_Varminter on November 02, 2020, 05:42:22 PM
Hi Dr Bob,

I have been busy in my shop and keep on forgetting to check inb with you...
Do You have 3 of these Fantastic slimline plugs to shopp to the Colonies??
How much with shipping??

How are You and Fran doing during this Lockdown???

Hugs to Fran!

Stuart
Title: Re: Just in from Italy slimline bottom plugs
Post by: Dr Bob on November 03, 2020, 04:07:33 PM

PM me your address Stuart I have had a tidy up and can't find a bloody thing ;)

Bob