Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Steve g on January 28, 2026, 05:54:29 PM

Title: Mk4 trigger
Post by: Steve g on January 28, 2026, 05:54:29 PM
Hi all, just been nosey'ing around forums and it seems that the Mk4 trigger is mentioned and sought after  for a rapid. Can anyone explain as to why this is? Also is it able to recognised one just by looking at it, or do you have to remove the stock?
I'm intrigued about the hype, as the trigger on my mfr feels lovely.
Also does anyone have any experience of the Dawson trigger..... :)
Title: Re: Mk4 trigger
Post by: Squinty on January 28, 2026, 06:47:39 PM
The mk4 trigger is the best of the tgriggers they used and is still used in the RAW and new Theoben series.
The triggers can be easily identified without removing the stock..

Title: Re: Mk4 trigger
Post by: Ca_Varminter on January 28, 2026, 07:11:38 PM
You can spot the Mark 3 trigger by the configuration of the Safety Lever!
(https://photos.imageevent.com/scl_electronics/gun/air/small/Mark%203%20trigger1.jpg)(https://photos.imageevent.com/scl_electronics/gun/air/small/Mark%204.jpg)
Notice the Safety Lever is located on the outside of the trigger housing!!

The Mark 4 trigger is just a Refinement of the Mark 3 (this all started in the MFR)
**BTW** It is also a drop in replacement for the Mark 3...but you also will need to change Hammers.....
The geometry and parts adjusted to more Reliable and Predictable!!
So this was one of the great innovations By Ben Taylor for PCP's...
Since the Mark 4 trigger is one of the more copied trigger in PCP's!

I also own one Gordy Dawson AWESOME Benchrest Race Triggers...
It has ceramic hybrid ball-bearins on all pivot points
No Need to get in to this too deep...
I have a Full breakdown post on here...
https://rapidforum.co.uk/forum/index.php?topic=407.0

HTH,
Stuart
Title: Re: Mk4 trigger
Post by: Dave74 on January 28, 2026, 07:13:57 PM
There's one on eBay at the moment. Looks like a dr bob one which isn't mentioned in the sale
Title: Re: Mk4 trigger
Post by: Steve g on January 29, 2026, 05:53:23 PM
Cheers lads, so would mine be a mk4 as the safety comes out the block and not down the side?
But the pins don't look the same.
There's some precision detail that I can't even imagine gone into that Dawson. I've heard people go on about them, maybe one day I'll get the chance to experience one.

Title: Re: Mk4 trigger
Post by: Ca_Varminter on January 29, 2026, 06:09:26 PM
Yes Sir!!!!!
That is an early Mark 4 trigger with that contoured safety lever!!
Also it has the updated "Setback" Trigger blade!
Not with the old Stick Trigger Blade
(https://photos.imageevent.com/scl_electronics/gun/air/small/setback2_1_.jpg)(https://photos.imageevent.com/scl_electronics/gun/air/small/setback3_1_.jpg)

Very Nice!!
Stuart
Title: Re: Mk4 trigger
Post by: Squinty on January 29, 2026, 06:49:21 PM
Quote from: Ca_Varminter on January 29, 2026, 06:09:26 PMYes Sir!!!!!
That is an early Mark 4 trigger with that contoured safety lever!!

Very Nice!!
Stuart

late mk4 safety, 26k block ;)

Quote from: Steve g on January 29, 2026, 05:53:23 PMBut the pins don't look the same.
 

probably cut the wrong length  ;D  but the later pins were 3mm v earlier 1/8"
Title: Re: Mk4 trigger
Post by: DAVYW1 on January 29, 2026, 07:26:23 PM
Just wondering! I have a mk4 trigger on my fac mk2 with the old trigger blade. Can the trigger blades be swapped if you have a newer type spare?
Title: Re: Mk4 trigger
Post by: Steve g on January 29, 2026, 09:19:12 PM
Thanks to all for the info. Happy days.
As I said "the trigger on my mfr feels lovely"...no wonder
Title: Re: Mk4 trigger
Post by: Ca_Varminter on January 29, 2026, 09:21:08 PM
The trigger blades are Interchangeable.....If you can find one....
Talk to Dr Bob... His triggers blades were of the Setback style......
Or... You can go the Anschutz route.....
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/new-trigger2.jpg)

Good Luck,
Stuart
Title: Re: Mk4 trigger
Post by: DAVYW1 on January 30, 2026, 09:28:41 AM
Thanks Stuart,
I have a new type blade spare and had it fitted before but the trigger was unpredictable and didnt seem to work right. Maybe i didnt have it fitted correctly.
Title: Re: Mk4 trigger
Post by: Squinty on January 30, 2026, 01:02:49 PM
Quote from: DAVYW1 on January 29, 2026, 07:26:23 PMJust wondering! I have a mk4 trigger on my fac mk2 with the old trigger blade. Can the trigger blades be swapped if you have a newer type spare?

yes and no, early and late blades have different diameter pins.
I couldn't get on with the set-back trigger and bought a Rowan adjustable
Title: Re: Mk4 trigger
Post by: DAVYW1 on January 30, 2026, 09:50:37 PM
Quote from: Squinty on January 30, 2026, 01:02:49 PM
Quote from: DAVYW1 on January 29, 2026, 07:26:23 PMJust wondering! I have a mk4 trigger on my fac mk2 with the old trigger blade. Can the trigger blades be swapped if you have a newer type spare?

yes and no, early and late blades have different diameter pins.
I couldn't get on with the set-back trigger and bought a Rowan adjustable


Thanks Squinty, that make's sense. It didnt seem right however i adjusted it.