Print Page - Rapid .22 hammer spring

Title: Rapid .22 hammer spring
Post by: Maxwell on June 03, 2020, 12:24:39 PM

Can anyone tell me the dimentions for rapid .22 standard hammer spring

Title: Re: Rapid .22 hammer spring
Post by: KevG on June 03, 2020, 11:28:39 PM

Normally 1.5 mm section and around 55mm long for mk2 and around 60mm long for mk1.though each gun can be slightly different on spring length.
KevG

Title: Re: Rapid .22 hammer spring
Post by: Maxwell on June 05, 2020, 11:06:15 AM

What should the outside or inside diameter be

Title: Re: Rapid .22 hammer spring
Post by: Squinty on June 05, 2020, 07:38:45 PM

Read this on a old post. might have been Airgunadvice..if I remember correctly (full size) springs

1.47mm wire
9..6mm i/d
12.54mm o/d
17 turns
67mm long

Theoben Rapid Forum

Everything Technical About Rapid => Technical => Topic started by: Maxwell on June 03, 2020, 12:24:39 PM