Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: NightOwl on April 18, 2025, 01:54:38 PM

Title: 3D printed Magazine .22 for Rapid Mk1
Post by: NightOwl on April 18, 2025, 01:54:38 PM
Some info if you please.

I'm out of touch with recent developments concerning the Rapid7, so my question is :

I'm after a 12 shot mag for my MK1. Who sells the most reliable ones? I've seen a few  on eBid that are 3D printed but wondering if they are any good. What say you?
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: Ca_Varminter on April 18, 2025, 02:52:24 PM
I still like the Michined ones.... just my Preference......
Dr Bob was the UK producer....Check with Him...
The other maker is on my side of the Pond.. RAW...
Good Luck,
Stuart
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: angrybear on April 19, 2025, 08:16:01 PM
Chap who makes the 3D ones is on here I think, He was deffo on the other closed forum, but I forget his name,
I actually prefer the 3D with a fixed cover ones, I find them much less faff.
Just wish he'd make some in .20 cal.
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: NightOwl on April 20, 2025, 05:12:23 AM
Ok I've asked Dr. Bob but he's not answering at the moment. I did read a post somewhere that he has been absent for a while. Hope he's ok.
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: DB.20 on April 20, 2025, 10:03:12 PM
I've got Dr Bobs mags in .22 and .177 and they've been great, never had a fault or any problems with them, highly recommended. A company by the name of Pneumatics Ballistics make mags for the Rapid and I bought one of theirs to try after being impressed by the versions they make for BSA PCPs. Nicely machined and worked fine but I had to set the barrel slightly forward for it to fit smoothly into the slot. This means the Theoben and Dr Bob mags are then a bit sloppy a fit and pellets don't chamber smoothly. Happy to have it in reserve in case I happen to lose, break or get faults with those in general use.
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: NightOwl on April 21, 2025, 08:59:41 AM
Thanks for the reply. Yeah I'll probably go with Bob's mags as I've heard they are very good from a few people. Can't seem to get hold of him though at the moment. Is it best to just order them on his website should I contact him first?
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: etiam viviens on April 21, 2025, 12:48:43 PM
Carm has good 3d printed magazines
https://www.carm-magazines.com/magazine-for-theoben-rapid-7-air-rifle.aspx
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: DB.20 on April 21, 2025, 08:16:33 PM
Hello NightOwl. I've ordered various parts from Dr Bob but only had to contact him once with a technical question and he was very helpful. He may be on holiday or otherwise involved if you can't get hold of him. Yes, hope all is ok for him if he's not contactable! I reckon you'll be pleased with the Dr Bob mags and then there's his 'No quibble guarantee' in the unlikely event that you had any issues.
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: NightOwl on April 22, 2025, 10:52:49 AM
Quote from: etiam viviens on April 21, 2025, 12:48:43 PMCarm has good 3d printed magazines
https://www.carm-magazines.com/magazine-for-theoben-rapid-7-air-rifle.aspx

Yeah they do look the business.
Title: Re: 3D printed Magazine .22 for Rapid Mk1
Post by: nevadacowboy on May 01, 2025, 02:10:05 PM
Another vote for Carm mags. I have 10 of them.  There is no longer a minimum order which makes life easier.