Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: MartinTTR2 on April 15, 2025, 07:48:02 PM

Title: TTR2 - Looking for information
Post by: MartinTTR2 on April 15, 2025, 07:48:02 PM
There seems to be very few TTR2 guns around and even less information about them.

Does the forum or any members hold any original sales or service / breakdown literature for a TTR2 that could be shared, please?

My TTR2 is lovely to use... accurate, very quiet, a little on the heavy side but so easy to maintain.

I'd just like some official information to go with it... what is it based on, what were Theoben's claims, exploded diagram, sales brochure, etc. Anything really.

My only criticism is that it is a big gun and I have short arms  :) 

I'm new on the forum so I hope this is the right place.
Title: Re: TTR2 - Looking for information
Post by: Squinty on April 15, 2025, 10:13:42 PM
Only the TTR1, a mk2/S-type Rapid in a synthetic stock and iirc with a parkerized barrel.

The TTR2..essentially an MFR
Title: Re: TTR2 - Looking for information
Post by: MartinTTR2 on April 18, 2025, 07:45:56 PM
Thank you very much for that Squinty... perhaps the best and closest I've seen in relation to my TTR2.

It has the synthetic stock. I replaced the metal shroud in favour of a carbon fibre and delrin construction.
It is much lighter and very, very quiet.

My only gripe is that it is a long gun and I have short arms!
Title: Re: TTR2 - Looking for information
Post by: Squinty on April 18, 2025, 08:24:59 PM
you're welcome
There was an American gunshop / site that had a 13+ year old listing for a TTR2 with Theobens bumf.
Gone now that I've looked for it again, who said the internet is forever?
Title: Re: TTR2 - Looking for information
Post by: Dave74 on April 25, 2025, 09:18:33 PM
Stick up a few photos, the ttrs had a different finish to the blocks parkerised was a Matt finish, that's how you tell an original ttr
Title: Re: TTR2 - Looking for information
Post by: MartinTTR2 on April 28, 2025, 04:41:34 AM
DAVE74... It has a matt finish on the block. Also has the solid composite stock and long black shroud although that has been replaced with a lighter carbon fibre construction.
Title: Re: TTR2 - Looking for information
Post by: MartinTTR2 on April 29, 2025, 10:36:57 AM
I'm looking for a matt finish black paint for the stock.

I used to have a paint that effectively welded itself to the surface of plastics... must have had a strong solvent in it.

That way it won't peel or ship off.
Title: Re: TTR2 - Looking for information
Post by: angrybear on April 29, 2025, 11:20:54 AM
Quote from: MartinTTR2 on April 29, 2025, 10:36:57 AMI'm looking for a matt finish black paint for the stock.

I used to have a paint that effectively welded itself to the surface of plastics... must have had a strong solvent in it.

That way it won't peel or ship off.

Simonize tough black.  ;)  Matt or silk.
Title: Re: TTR2 - Looking for information
Post by: MartinTTR2 on April 29, 2025, 09:22:01 PM
Quote from: angrybear on April 29, 2025, 11:20:54 AM
Quote from: MartinTTR2 on April 29, 2025, 10:36:57 AMI'm looking for a matt finish black paint for the stock.

I used to have a paint that effectively welded itself to the surface of plastics... must have had a strong solvent in it.

That way it won't peel or ship off.

Thanks - I'll have a look at that.

Martin

Simonize tough black.  ;)  Matt or silk.
Title: Re: TTR2 - Looking for information
Post by: Grey on May 14, 2025, 08:22:11 PM
2006 catalogue page
Title: Re: TTR2 - Looking for information
Post by: Kernal on May 14, 2025, 08:27:11 PM
Nice you should upload it to our uploads directory and place your name on the upload.
Title: Re: TTR2 - Looking for information
Post by: Grey on May 14, 2025, 08:33:04 PM
If only I knew how 😂 , I'm technically challenged.
I also have 2005 and 2006 catalogue, I will do pictures of both once I get some daylight as I find it best for pictures .
Title: Re: TTR2 - Looking for information
Post by: Kernal on May 14, 2025, 08:45:45 PM
lol you just take your time and enjoy this site and if you have anything to offer well that's a bonus Gary!

But if you can try to place anything like documentation or technical information into our up and downloadable section but also in the part where you place text about the file you uploaded also place your name to give you credit for forwarding the documents you put forward.