Text only | Text with Images

Theoben Rapid Forum

Everything Technical About Rapid => Technical => Topic started by: Squinty on June 17, 2024, 04:34:11 PM

Title: lead in /breech chamfer angle?
Post by: Squinty on June 17, 2024, 04:34:11 PM
as per title, what angle should the breech chamfer be set to?

thanks
Steve
Title: Re: lead in /breech chamfer angle?
Post by: Ca_Varminter on June 17, 2024, 06:48:00 PM
The angle I chamfer the breach is about 30°..60° inclusive....
Also cut a lead-in of about 7°....

Stuart
Text only | Text with Images