Theoben Rapid Forum
KevG Lathe work undertaken => kevG section => Topic started by: AndyR on May 31, 2023, 06:32:11 PM
Hi Kev
You did some bits for me a good few years ago for my rapids. I have a leaky .20 mfr. The reg is the problem I think.
Are you still working on rapids. If so how much to have a look and change all the o rings on a block and reg and set it up right.
Cheers Andy
Yes KevG is still keep all those Rapid Alive!!
He has keep that Rabid Fox Fed!!!
He is busy, so he should respond soon..
Your Sick MFR is in good hands
Stuart
Cheers Stuart