Print Page - Bolt plate bottom screw.

Title: Bolt plate bottom screw.
Post by: nevadacowboy on April 16, 2023, 04:34:05 PM

Can anyone please give me the dimensions of this screw please so I can try and buy one or has anyone got one going spare please.
IMG_0535.JPG

Title: Re: Bolt plate bottom screw.
Post by: Squinty on April 16, 2023, 07:25:18 PM

M4 x 6mm
Sorry don't have any

Title: Re: Bolt plate bottom screw.
Post by: angrybear on April 18, 2023, 06:08:58 PM

My local super hardware shop has got the M4 countersunk hex drive, but only in stainless, & the shortest he does is 12mm so will need cutting down
He also has the M3 for the top screw again stainless only, & needs cutting to length.
The princely sum of 20p-ea for the M4, 12p-ea for the M3.

I'll be going that way on Thursday if you want some, it's the other side of Exeter about 10 miles away.

Title: Re: Bolt plate bottom screw.
Post by: nevadacowboy on April 19, 2023, 02:55:02 PM

Thanks for the offer @angrybear. I found the sizes and had 20 of each delivered today from GWR fixings.

Title: Re: Bolt plate bottom screw.
Post by: Dr Bob on June 12, 2023, 01:41:35 PM

Sure it's not 4 BA ?

Bob.

Title: Re: Bolt plate bottom screw.
Post by: KevG on June 13, 2023, 11:01:37 PM

the first double bolt plates were 4ba thread in the block but later changed to m4
kevG

Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: nevadacowboy on April 16, 2023, 04:34:05 PM