I've just seen this "Curved oversized teardrop bolt handle on a selling page and was wondering if anyone knows who makes / sells them ?
Mick
That's mine,I had it made by a guy on agf and bent it myself
Cheers Matt could you PM me please
DrBob does these doesn't he !!
Quote from: Mattb on April 10, 2023, 09:34:16 AMQuote from: CheshireSniper on April 10, 2023, 07:57:26 AMDrBob does these doesn't he !!
not to the size I wanted
I'm sure he could make you the size you want buddy.
Here one I made out of Titanium.
I am sure you can find someone with a Lathe....
It really not hard to make...
Stuart
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/20201028_121746.jpg)
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/20190405_184212.jpg)
Thats nice 👍
Actually this one is my Ver.2 of my bolt handle!
It is actually a 3 piece design.
It made up of the Teardrop handle Threaded stem and a rotating sleeve.
This gives it a silky smooth lock-up...
Even with a tight lock-up setting!!
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/20201028_121656.jpg)
Stuart
Clever...I wish I had your skills 😉
TR Robb sells tear drop leavers
Now that idea i like Stuart.
So it rotates when you pull back and push forward.
I need to pay our friend kevG a visit.
Regards kev.
Quote from: KCE on May 08, 2023, 11:02:10 PMNow that idea i like Stuart.
So it rotates when you pull back and push forward.
I need to pay our friend kevG a visit.
Regards kev.
Just Make a Donation to the Rabid Fox as you enter the Cave!
Stuart
That's a great idea with the 3 part bolt handle Stuart 👌 it would make the cocking action very slick! 👍
Well from a mechanical viewpoint.....
It is all about spreading out the "point" force that is
focused between the Bolt Handle and the Gate Plate....
Then allowing the parts under force to rotate!
So to help smooth things out...
I polished the sleeve and inner stem.
Also little teflon grease on that inner stem
as I assembled my Bolt Handle..
Stuart
Just for the Curious....
This what a Tactical Bolt Handle with the rotating sleeve looks like....
The only difference here.. I had to make a brass insert.
To adapt the inner inner stem to 5/16" x 28 threads
(https://photos.imageevent.com/scl_electronics/gun/misc/websize/20201031_190931.jpg)
(https://photos.imageevent.com/scl_electronics/gun/misc/websize/20201031_191648.jpg)
(https://photos.imageevent.com/scl_electronics/gun/misc/websize/20201102_1358461.jpg)
Stuart
Great work Stuart! Using that you could fit just about any bolt knob 👌
Quote from: Daztilley on May 09, 2023, 06:30:31 PMGreat work Stuart! Using that you could fit just about any bolt knob 👌
Yes Sir....
That was the idea I was going with.
Stuart
Quote from: Mattb on March 19, 2023, 11:46:12 AMThat's mine,I had it made by a guy on agf and bent it myself
What size is oversized? How much longer than the standard? thanks
Quote from: Ca_Varminter on April 10, 2023, 04:06:32 PMActually this one is my Ver.2 of my bolt handle!
It is actually a 3 piece design.
It made up of the Teardrop handle Threaded stem and a rotating sleeve.
This gives it a silky smooth lock-up...
Even with a tight lock-up setting!!
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/20201028_121656.jpg)
Stuart
Brilliant! Do you make any to sell? Or is it just a personal project?
Regards, Rye
I have done a few for Friends...
But sending it over the Pond would be Cost prohibitive....
I think you could convince KevG and His Fox to do one for You!!
Or anyone with a Lathe!
Good Luck,
Stuart
Quote from: Ca_Varminter on July 19, 2024, 04:37:26 AMI have done a few for Friends...
But sending it over the Pond would be Cost prohibitive....
I think you could convince KevG and His Fox to do one for You!!
Or anyone with a Lathe!
Good Luck,
Stuart
Ah that rabid fox 🤣🤣🤣🤣
I'll have a word with him cheers
Rye
Quote from: rye_1977 on July 19, 2024, 04:29:36 PMAh that rabid fox 🤣🤣🤣🤣
I'll have a word with him cheers
Rye
Oh So You are Know about kevG's Evil Zombie Rabid Fox
(https://photos.imageevent.com/scl_electronics/misc/mages/RABID%20FOX.gif)
Ask KevG for a Discount due to Fur Contamination of your Rapid!!!
;D ;D ;D ;D ;D ;D
Stuart
How can I not!
Had many a nightmare about that....face 🤪🤣🤣🤣
Rye