Text only | Text with Images

Theoben Rapid Forum

Everything Technical About Rapid => Technical => Topic started by: Deejayuu on January 25, 2023, 07:58:03 PM

Title: Rapid fill chamber to valve housing port info. please
Post by: Deejayuu on January 25, 2023, 07:58:03 PM
Thanks for looking. Further tampering with the poorly Rapid. These are sub. 12 and FAC blocks.
Intrigued how the hole is made in production. One seems to be enlarged by skew drill from outside
Title: Re: Rapid fill chamber to valve housing port info. please
Post by: Millingman on January 25, 2023, 09:41:21 PM
Not liking the look of those threads, look very ragged, is it an original block? The threads should be blued if original, looks very rough.
Title: Re: Rapid fill chamber to valve housing port info. please
Post by: KevG on January 25, 2023, 10:23:33 PM
some were blacked on the internal threads and some were not.
KevG
Title: Re: Rapid fill chamber to valve housing port info. please
Post by: Squinty on January 26, 2023, 02:07:29 PM
Drilled/milled from the inlet to valve chamber
Text only | Text with Images