Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Budder on September 28, 2022, 02:50:07 PM

Title: Trying slugs
Post by: Budder on September 28, 2022, 02:50:07 PM
Don't worry I'm not eating them,yet!🤣 Got some Pro Hunter slugs in 22 and 177,can't wait to give them a try out. Already had a some sample 22's off them,seemed to go well. 22's are 17.8g and the 177 are 9.5g ,running them sub 12.
Title: Re: Trying slugs
Post by: Aggy on September 28, 2022, 06:24:01 PM
Could you post some photos of the .22 are they hollow base ? I have a swage press but 18 grain are light for slugs
Title: Re: Trying slugs
Post by: KevG on September 28, 2022, 06:29:22 PM
wouldn't mind trying some of those in .177
KevG
Title: Re: Trying slugs
Post by: Budder on September 28, 2022, 07:17:28 PM
Quote from: Aggy on September 28, 2022, 06:24:01 PM
Could you post some photos of the .22 are they hollow base ? I have a swage press but 18 grain are light for slugs
Yes they are hollow base, just running them sub 12 so didn't want to heavy a slug
Title: Re: Trying slugs
Post by: nevadacowboy on September 28, 2022, 08:27:20 PM
Quote from: KevG on September 28, 2022, 06:29:22 PM
wouldn't mind trying some of those in .177
KevG


Hi Kev,


I have some mako slugs in .177 that you are welcome to if they are any good to you.


https://www.precision-ballistics.co.uk/mako-series (https://www.precision-ballistics.co.uk/mako-series)


Pm me if you want them.


Bob
Title: Re: Trying slugs
Post by: Aggy on September 28, 2022, 08:42:03 PM
I swage .22 slugs both flat and hollow base but 20 grain is about as low as I can go up to a ridiculously huge 73 grain
Title: Re: Trying slugs
Post by: Aggy on September 28, 2022, 08:42:57 PM
Other photo
Title: Re: Trying slugs
Post by: Aggy on September 28, 2022, 08:43:32 PM
And a huge slug
Title: Re: Trying slugs
Post by: Budder on September 28, 2022, 09:08:06 PM
Quote from: Aggy on September 28, 2022, 08:43:32 PM
And a huge slug
Jeez that is on steroids that one. Need more than 12ft/lbs to propel that!
Title: Re: Trying slugs
Post by: Aggy on September 28, 2022, 09:24:58 PM
Put it in Fx impact in runs 29 grains at 60 ftlb .the 73 was single loaded and left the barrel somewhat slower .
Title: Re: Trying slugs
Post by: Therapidman on September 29, 2022, 02:51:48 PM
Quote from: Aggy on September 28, 2022, 08:43:32 PM
And a huge slug

Wouldn't mind trying some of your slugs aggy.
Title: Re: Trying slugs
Post by: Aggy on September 29, 2022, 04:51:33 PM
Where you from what weight you after ?
Title: Re: Trying slugs
Post by: Therapidman on September 30, 2022, 04:29:50 PM
Quote from: Aggy on September 29, 2022, 04:51:33 PM
Where you from what weight you after ?

Doncaster looking for some 27g or 28g slugs
Title: Re: Trying slugs
Post by: Aggy on September 30, 2022, 06:26:52 PM
I can make either ,what you shooting and what power , cover the £2.50 postage and I'll send you 50
Title: Re: Trying slugs
Post by: Aggy on September 30, 2022, 06:30:07 PM
Or make a donation to this site or a worthy cause ,up to you
Title: Re: Trying slugs
Post by: Therapidman on September 30, 2022, 06:32:34 PM
Could you make some 28g please I can send you the money over
Title: Re: Trying slugs
Post by: Aggy on September 30, 2022, 07:14:59 PM
Yes no problem will do them over the weekend
Title: Re: Trying slugs
Post by: Therapidman on September 30, 2022, 07:55:14 PM
Thanks mate
Title: Re: Trying slugs
Post by: angrybear on October 06, 2022, 12:00:37 AM
just got a tin of the 17.8gn .22 to try out in the Rapid.
Stunning build quality & weight consistency, but at the price I'm not quite sure if I want them to be good or not ???
Title: Re: Trying slugs
Post by: Andycoup on October 06, 2022, 08:01:15 AM
Quote from: angrybear on October 06, 2022, 12:00:37 AM
just got a tin of the 17.8gn .22

Where are they from?

Cheers, Andy.
Title: Re: Trying slugs
Post by: angrybear on October 06, 2022, 03:09:11 PM
I got them off the bay but you can get them direct from www.prohunterswaging.co.uk. £18.33 for 100.

I've just given them a go, superb manufacture quality, extremely accurate, 5p hole at 42yds, but knocked a full ftlb off, 520fps ave @10.6fpe.
little if any expansion on those recovered from 20yds,
I bet they'll be fantastic at 25-30fpe, not sure I'd bother sub 12 unless you have to shoot from 50yds.
Title: Re: Trying slugs
Post by: Aggy on October 08, 2022, 10:38:53 AM
Let me know how you get on With the slugs Rapidman
Title: Re: Trying slugs
Post by: Therapidman on October 08, 2022, 11:51:01 AM
Quote from: Aggy on October 08, 2022, 10:38:53 AM
Let me know how you get on With the slugs Rapidman

Thanks for making me them yesterday mate . Was good meeting and chatting to you