Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Robs5230 on July 13, 2022, 08:18:16 AM

Title: Is anyone making carbon shrouds?
Post by: Robs5230 on July 13, 2022, 08:18:16 AM
Just wondered whether anyone was making back vented carbon shrouds, to suit a rapid with a 50mm dia bottle?
Thanks
Title: Re: Is anyone making carbon shrouds?
Post by: Andycoup on July 13, 2022, 10:01:21 AM
Kevg maybe.
I know halinfax on the agf does.
Title: Re: Is anyone making carbon shrouds?
Post by: Robs5230 on July 13, 2022, 11:39:36 AM
Last time I chatted to Kev, he wasn't doing shrouds.
But thanks
Title: Re: Is anyone making carbon shrouds?
Post by: KevG on July 13, 2022, 07:07:51 PM
just don't have the time to many irons in the fire,have you tryed chock Booth,he was making them quietest ive ever heard.he is not realy an Internet person though.
KevG
Title: Re: Is anyone making carbon shrouds?
Post by: Robs5230 on July 13, 2022, 07:18:23 PM
Quote from: KevG on July 13, 2022, 07:07:51 PM
just don't have the time to many irons in the fire,have you tryed chock Booth,he was making them quietest ive ever heard.he is not realy an Internet person though.
KevG
Don't know him Kev.
Do you have any contact details you could let me have?
Cheers
Title: Re: Is anyone making carbon shrouds?
Post by: nemo1966 on September 15, 2022, 09:30:10 AM
Quote from: Andycoup on July 13, 2022, 10:01:21 AM
Kevg maybe.
I know halinfax on the agf does.
Why vented?
Title: Re: Is anyone making carbon shrouds?
Post by: Ca_Varminter on September 15, 2022, 02:32:29 PM
The Reason for a Back vent and the Shroud .
(https://photos.imageevent.com/scl_electronics/gun/inovairtech/websize/20160126_111854.jpg)
(https://photos.imageevent.com/scl_electronics/gun/inovairtech/websize/20160117_110931.jpg)

You are making a Reflex/Volumetric type of moderator. This means you are using the full length of the Shroud
as a chamber of the moderator...
This make it a very effective..
So the vents is to allow More of the Volume of the blast to expand backwards.
You don't need them on powder-burners due to the Higher pressure of the muzzle blast!!

Stuart
Title: Re: Is anyone making carbon shrouds?
Post by: Aggy on September 15, 2022, 04:33:18 PM
What diameter tube are you using
Title: Re: Is anyone making carbon shrouds?
Post by: Ca_Varminter on September 15, 2022, 05:34:58 PM
Quote from: Aggy on September 15, 2022, 04:33:18 PM
What diameter tube are you using
For this one it is 1-5/8" or 41mm

Stuart
Title: Re: Is anyone making carbon shrouds?
Post by: nemo1966 on September 15, 2022, 05:40:41 PM
Quote from: Ca_Varminter on September 15, 2022, 02:32:29 PM
The Reason for a Back vent and the Shroud .
(https://photos.imageevent.com/scl_electronics/gun/inovairtech/websize/20160126_111854.jpg)
(https://photos.imageevent.com/scl_electronics/gun/inovairtech/websize/20160117_110931.jpg)

You are making a Reflex/Volumetric type of moderator. This means you are using the full length of the Shroud
as a chamber of the moderator...
This make it a very effective..
So the vents is to allow More of the Volume of the blast to expand backwards.
You don't need them on powder-burners due to the Higher pressure of the muzzle blast!!

Stuart

I always found the holes useless, even on FAC models. The holes actually seem to make the moderators louder. I use the same design as Nutshot (he showed me how too make them many years ago).  A good sized mod will allow the air down the back end of the barrel and it compresses, then after the shot it quitely leaves through the muzzle end, I've found you don't need to dispell all the air, just take the sting out of the sound.

The Nutshot muzzle insert design is quite a bit different to yours. Yours looks very much like one of his very early attempts.



Title: Re: Is anyone making carbon shrouds?
Post by: Ca_Varminter on September 15, 2022, 06:19:35 PM
Everyone has their own Secret Sauce...
Using a short stack of K-baffles..
I hear slight change in tone and intensity...
I use small vent holes that are cross drilled to the ports you see on the rear extension

Stuart