Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: smithy123 on July 12, 2022, 10:55:50 AM

Title: Valve body question
Post by: smithy123 on July 12, 2022, 10:55:50 AM
My mk1 rapid had this exhaust valve body in it, however a few weeks ago I was doing something to it and it started to leak through the barrel so I took it out, but when I showed it to kernal his response was "OMG".

He gave me a black delrin type body, anyway the rifle is now all good as you all know! I was just curious as to what the difference is between them and why kernal reacted the way he did
Title: Re: Valve body question
Post by: angrybear on July 12, 2022, 11:09:32 AM
I would guess the age of those valves & difficulty of finding the correct seals, plus that one looks a bit butchered.

I believe those bodies are in two parts with a special white seal inside that is no longer available anywhere.
Title: Re: Valve body question
Post by: Ca_Varminter on July 12, 2022, 03:13:11 PM
I think Kernal was surprised by seeing and Antique from the Rapid world!
They stop using the metal valve-bodies when the MK II came out.
A couple years later, they stop selling the re-sealing kit for them!!!!
I would keep it and put on your Mantle.......An Era gone by...

Stuart
Title: Re: Valve body question
Post by: Squinty on July 12, 2022, 05:11:48 PM
Probably the original -24 years old.
Title: Re: Valve body question
Post by: Aggy on July 12, 2022, 05:30:04 PM
I have one of those too
Title: Re: Valve body question
Post by: Daztilley on July 12, 2022, 05:38:38 PM
Yep got a couple of those valves in.my bits box
The reseal kits came with new white seals and a collet - to allow the 2 parts of the valve to be unscrewed
Title: Re: Valve body question
Post by: Daztilley on July 12, 2022, 06:08:12 PM
I do remember that people used to drop the valve into a cup of hot water - that would swell the white seal and then nip up the 2 parts of the valve and it would reseal 👍
Title: Re: Valve body question
Post by: smithy123 on July 13, 2022, 07:40:32 AM
Hi guys, the serial number on the block dates the rapid back to dec 1991
Title: Re: Valve body question
Post by: alan1 on July 26, 2022, 02:55:25 PM
I have one and 2 oridgernal white seals thay were for the r7 unreged thay have smaller ports I keep it for a spair thay would cost a lot more to produce than the plastic ones thay can be converted bb does them I think and others
Title: Re: Valve body question
Post by: Ca_Varminter on July 26, 2022, 05:31:57 PM
Yes..Many have made replacements in both metal and plastic..
Here is one of my versions for my Titanium MKII .... Stainless,Titanium(valve-stem) and Delrin(seal and liner)
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/valve2.jpg)

Stuart