Theoben Rapid Forum
Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Craigash on June 12, 2022, 11:38:41 AM
Sorry if I am going over old ground but I am not quite sure what is going on with my rapid mk1 and the power adjustment. Please advise me.
I have removed the large threaded plug from the rear of the action. In there is a spring with a plastic guide with a one piece washer. Tall top hat looking. The spring sits on a small washer. Under that is a piece or round bar with 2 diameters and a small spring on the small diameter. That sits inside the hammer. How do I drop the power? I have wound out the plug and it seems to have done the trick but other members have mentioned that it has an adjustment screw.
That "plug" is the adjustment screw cap ;)
Thankyou. And I have just discovered its an adjustable hammer. 👍
A longer hammer pip lowers the power, as the hammer has less momentum when it strikes, iirc about 17mm is ideal sub 12