Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: smithy123 on June 08, 2022, 11:10:05 AM

Title: Best fittings bottle
Post by: smithy123 on June 08, 2022, 11:10:05 AM
Hi all, just received my carbon bf bottle and I'm just wondering weather or not to fill it up and put it on the gun. The bottle is on the gun now but empty and the threads don't feel to bad when screwing it on.

Should I fill and put the bottle or just wait till I can get a valve and pip for it as I know a couple of you have told me that they can damage the threads on the regulator/fast flow.

I must say I do like the cf bottle tho really finishes the gun off, just to add the kevg silencer tomorrow when it arrives! I'm like a kid at Christmas waiting for parcels 😁
Title: Re: Best fittings bottle
Post by: jackrooz on June 08, 2022, 11:31:33 AM
give it a go mate ... its about 3/4 of the way down when it normally gets rough and tight ..

as said before some are ok some aren't  .
Title: Re: Best fittings bottle
Post by: smithy123 on June 08, 2022, 12:10:17 PM
Just filled bottle gone to put on and it's really tight at the last bit but the buddy bottle oring is a clear one could that be affecting it?
Title: Re: Best fittings bottle
Post by: smithy123 on June 08, 2022, 12:12:40 PM
Just give it anothe go and I'm pretty sure it's that seal as it's ripping thru it as I tightened it down more
Title: Re: Best fittings bottle
Post by: jackrooz on June 08, 2022, 12:53:53 PM
that seal is a good one they sell them as upgraded seals  on ebay ..   it seems you have got the same as alot of others don't keep trying it otherwise they ruin something
Title: Re: Best fittings bottle
Post by: smithy123 on June 08, 2022, 07:17:15 PM
Changed the seal and all work good still may get a dr bob valve when he's back just for peace of mind!