Here's my rapid 7 mk1 I've been tarting up over the past few days, it's totally original (unmolested).
Just need to decide weather I'm going to convert to a weaver rail set up or buy some scope mount raisers as my scope is touching the barrel shroud!
Another thing I'm undecided on is should I get a carbon fibre buddy bottle??
Has anyone on here got a 500cc carbon bottle on a mk1 rapid with the original stock?
Cheers Brad👍
That looks tidy. 8)
To be honest there's no weight to be saved, the 500cc carbon bottle isn't lighter than an alloy 400cc .
The mk1 is fast-flow and larger bottles can make the power curve/fill pressure a bit more sensitive to overfilling, may need to drop 5 bar to avoid a longer rise to the plateau.
And they're actually noisier, carbon bottles (and alloy 500s) ping like a bstwd on fastflow.
Hi squinty on the best fitting website there is roughly a 200g difference, and tbh the weihrauch silencer quietens the gun down quite a lot to be fair. I was thinking about getting a kevg silencer but I have carbon fibre wrapped the weihrauch one and it looks bob on so if it look the part and does what it's ment to do then why bother? But yeah I would like to see a couple photos of a mk1 with a 500cc carbon bottle before buying really??
Thats a beauty
hmmm.. bottom picture not 200g lighter ;D
purloined this picture (top) from AGF, the Best Fittings bottle has a long neck..
courtesy of AGF.. web search result
FX / Daystate 480cc
Cheers squinty, that looks mint that does!! I'll be getting one in next couple of weeks
here is my MK1 with a 500 carbon bottle
Thanks flyfisher that looks mint! I've ordered a 500cc Carbon bottle from best fittings. I'll get some pictures uploaded once it arrives
Quote from: smithy123 on June 05, 2022, 09:35:24 PM
Thanks flyfisher that looks mint! I've ordered a 500cc Carbon bottle from best fittings. I'll get some pictures uploaded once it arrives
Not so sure if people like best fittings on here with all the negative feedback i keep seeing but i`m sure some member`s will update you to correct what i say is actually true, But that being said i don`t think you can go wrong ordering the bottle from them it`s just the valve to the buddy bottle that i wouldn`t order from them get that from DrBob to make sure it`s 100% that`s my advice on that matter.
;)
Wish you told me this abit sooner already ordered the bottle with the valve, it had the option to get it with or without and I got it with the valve🤦🏻♂️
I belive its down to the pip in the valve ..and the brass thing. remove both ..ask Bob or kev for new pip..and the retaining screw
I might even have a spare pip should you need one
oh an a bottle valve
bang it on ebay or mewe
kev and Dr bobs service are un touch able
Dr bob life time garrantee
Cheers for the info jack, is it down to leaking by any chance? And I've ordered of dr bob before, however he's on his holidays at the moment so I can't place any orders unfortunately. He's back on the 13th
no its down to restrictive flow of air ..not energising at the right time ..
some of the threads not matching that sort of thing
personally..because for some the BF valves are fine and others not.
a) the pip restricts airflow with fastflow on FAC
b) the threads on mine were crap, ok new v old thread but the pitch was just far enough out to grnd or bind up.
Even after running a die over them,..rough as hell.
c) V2 pip dimensions with stainless 'tips's were awful and either activated in the wrong position or bottomed out on the spring/retainer whilst screwing the bottle on.
Unpressurised they screwed on...pressurised the bottle would bind up. Backing off the retainer and spring didn't help.
Never had a problem with the one on my Superten, even held air for 2 1/2 years.
I like Bob's valve bodies, no issues with the threads or sealing...but TBH the o-rings are a PITA,
In my humble opinion a PEEK pip would outlast delrin or o-ring seals...damned sight more expensive (now) but less complicated than steel tips and o-rings
So the bottles themselves are fine? So all I need to do is replace the valve on the bf bottle and it will be all good again?
yes .. to be fair mate .. you can ask kev to turn you up a new pip that's wat I did and had no problems since ..
I should have a spare valve and pip should you require it
The bottles are 100% just the valves can be hit and miss.
The new and old threads don't always marry up...I put the tightness down to bedding in but wasn't long before the threads bound up.
Be careful when you screw it on, try it without air pressure first.,
I'd be cautious if it gets a bit graunchy 3/4 of the way down where the threads are subjected to pressure loading, that's where they can bind up.
exactly the same thing happend to me and mine.. bottle threads raunched up my reg threads so bad I had to have them re threaded and basically became useless as it wouldn't accept anything else but that bottle
Jack could I pm you and arrange for me to buy a valve and pip for the bottle as I don't really fancy putting it on if it's going to ruin the fast flow?
yea.of corse mate ill have a dig about this after noon
Cheers jack, pm me if you manage to find it please and let me know what your wanting for it and how much postage is and I'll sort it out.
Thanks again👍