Theoben Rapid Forum
DrBob`s products & parts => Dr Bob's Section => Topic started by: The Robin on May 13, 2022, 06:31:25 PM
Hi Bob
Hope your well
If possible please could you let us know what size the internal o ring size is on one of your MFR valves.
This one has given up after many years of great service, the o ring is hanging in bits and no chance of measuring it .....
Thanks
Simon
This may help.....
From a post in the Tech area.
Stuart
Quote from: Dr Bob on May 12, 2022, 03:51:43 PM
Best Fitting insist on fitting standard shore 70 hardness O rings that inflate when filling and block the air flow this dramatically shortens their service life. I have harder ones specially made. They were going to be something like £70 for 100 or £80 for 1,000
They are the same size for my fill nipples and my bottle valve tips. People send me a self-addressed envelope and I give them away as they will be past their shelf life before I use them all.
Bob
Thanks Stuart, I've looked all over for the info and could I find it.
I will wait till Bob see's this post and go from there. Seems a bit cheeky just sending a self addressed envelope without prior notice : ;)
I'm sure Bob won't mind if you send him an SAE with a note begging nicely ;)
Hi Bob,
I could do with a few of these but I can.t see them on your web site. I have e mailed you and got an automated reply stating you are back of holiday and open for business. Please advise.
Cheers
Bob
Try phoning not e-mailing he usually answers immediately.