Noticed a few different rapids have writing on side mine has rapid system and made in Great Britain on other side my friends says rapid mk1 on and one of other lads doesn't say anything on. Just wondering if anyone knows why or what the differences are between them?
Mine is one of the last rapids to be made, on the left side it has Theoben England Rapid and the serial number, on the right side it's got nothing engraved just the scalloped area.
Theyball seem different, mk1 mk2 s-type and the mfr
Strange ain't it I didn't know if they was any meaning behind them saying different mine dates January 2002 according to that date sheet on here
The amount of marking and how it was done change of the years of production..
The early years of MKI and MKII, the marking were Engraved..
With make and even model.... MKI, MKII, S-type..... where it was made...
But as they grew, Theoben started to stamp them.. Faster production!
But towards the end, to cut cost, Theoben stop putting the model type.. and just stamped Rapid....
To was to cut cost... they didn't have to make separate runs of receivers for each model!!
Stuart
well I've got these, but apart from the trigger all use the same guts.
Quote from: angrybear on May 12, 2022, 01:33:23 AM
well I've got these, but apart from the trigger all use the same guts.
Did you happen to notice....
The Rapids marked "MKII" and "MFR", have a beveled front edge..
But the Newer one that is marked "Rapid" has a squared edge... another cosmetic change... cutting cost...
Stuart
Quote from: Ca_Varminter on May 12, 2022, 02:20:24 AM
Quote from: angrybear on May 12, 2022, 01:33:23 AM
well I've got these, but apart from the trigger all use the same guts.
Did you happen to notice....
The Rapids marked "MKII" and "MFR", have a beveled front edge..
But the Newer one that is marked "Rapid" has a squared edge... another cosmetic change... cutting cost...
Stuart
No idea no tbh I'm not clued up on these I've shot a few before and until recently never thought I'd own one but the ratting bug got me and there was only rapids I'd never owned but always wanted one I didn't even know if mine was mk1 or mk11 with wierd stock it has I know it's mk1 now tho :-)
Quote from: angrybear on May 12, 2022, 01:33:23 AM
well I've got these, but apart from the trigger all use the same guts.
That green one looks ace
Quote from: Simonoxo on May 12, 2022, 04:14:55 AM
No idea no tbh I'm not clued up on these I've shot a few before and until recently never thought I'd own one but the ratting bug got me and there was only rapids I'd never owned but always wanted one I didn't even know if mine was mk1 or mk11 with wierd stock it has I know it's mk1 now tho :-)
Well just by your photos, not being able to see the internals...
You have an early MKI...
The give-away is those Micky Mouse ears Mag protectors....
Stuart
Yeh I think it was 2002 January so 20 year old I found a date sheet on this page :-)
Quote from: Ca_Varminter on May 12, 2022, 02:20:24 AM
Did you happen to notice....
The Rapids marked "MKII" and "MFR", have a beveled front edge..
But the Newer one that is marked "Rapid" has a squared edge... another cosmetic change... cutting cost...
Stuart
Well spotted, I'll admit I hadn't noticed & I've owned 2 of them for almost 10 years ???
Quote from: Ca_Varminter on May 12, 2022, 02:20:24 AM
Quote from: angrybear on May 12, 2022, 01:33:23 AM
well I've got these, but apart from the trigger all use the same guts.
Did you happen to notice....
The Rapids marked "MKII" and "MFR", have a beveled front edge..
But the Newer one that is marked "Rapid" has a squared edge... another cosmetic change... cutting cost...
Stuart
was there any internal changes over the scalloped block and the newer sqaured block or was that literally a cost saving corner to cut ( or leave uncut as it were ?
Along with the Scallop Cut..
There is the Mark 4 trigger.
Also the addition of that dreaded sintered bronze filter.
If you look at the Rapid receiver, that bevel cut was purely cosmetic!
So it would save them one step in the machining.
That's about it!
Stuart
Quote from: Ca_Varminter on May 12, 2022, 02:05:25 PM
Along with the Scallop Cut..
There is the Mark 4 trigger.
Also the addition of that dreaded sintered bronze filter.
If you look at the Rapid receiver, that bevel cut was purely cosmetic!
So it would save them one step in the machining.
That's about it!
Stuart
Thanks for info I had no idea. All I knew was there was a mk1 and 2 but still finding out about differences in these there cracking rifles :-)