Hi guys,
I'm looking for a scope for my mk2 the one on at the moment has a 30mm tube and my head position is slightly too low on the cheekpiece for proper head alignment. So I'm thinking a 25mm tube with as low as possible mounts allowing for the magazine to fit obviously may be the better option, only problem is id like a fine reticle rather than the more common types.
Any ideas greatly appreciated cheers.
Tim
what mounts have you got on it?
You could fit a rail and low mounts - keeping your current scope.
As the square /elongated turret blocks on most modern 30mm scopes are too big for the Rapids 85mm centres...a rail helps bring it back rather than needing to raise the tube.
May work out easier / cheaper than trying to find a decent 25mm scope.
I was looking in that direction.. for a lighter scope.
But these days that tube size is limited to the budget end. And 30mm is universal if you want anything more than a basic duplex or thick mil type.
I have an old Tasco on my mk1 .20.. 16oz, getting on for 25 years old and still clearer than most of the new sub £300 scopes.. saying that it wqs £450 back then.
Haven't found anything close to replace it.
Personally I've always found that the cheek piece / comb on Rapid stocks a bit low with OE 30mm mounts.
All mine have adjustable butt pads to help bring it up.
I happen to know what sounds like the perfect scope for you but sadly it's no longer made, Hawke Vantage SF IR 4-16x50 (model 14291)
1" tube, 10x half mil dot ret (same as the Sidewinder), low turrets, sidewheel focus, red/green ir.
I doubt you can find anyone that still has stock, but might be worth a look.
i have have few scopes here that ill sorting out and putting up for sale if you're interested?
here's a list of some of the scopes
Here's a list of the my scopes
some are Jap Scopes 80/90s Scopes and some are not
Tasco 4x40 gloss finishes Jap Scope good condition
x3 Tasco AG 3-9x50 AO Jap Scope used condition
Tasco AG 3-9x50 AO Jap Scope Very Well Used
Kassnar 3-9x56 PA WA Jap Scope Well Used
Kassnar Beta3 6x42 Jap Scope good condition
Tasco AG 3-9x50 AO Milldot Matt Finish Scope in good condition
This is the last AG Scope Tasco made The Date on The Scope is 2001/7/12 good condition
Tasco 3-9x40 Scope gloss finishes good condition
Boxed Simmons 8 Point 1.5-5x32 matt finish Scope A1 condition
Hawke Vintage 3-9x40 milldot matt finish Scope in very good condition
Hawke Eclipse 4-16x50 AO IR Scope good condition
Hawke Sport HD 3-9x50 good condition
also have other that have to sort out
I've just got a rapid mk2 and I personally don't like the fixed location for mountain optics, got a Dr Bob picatinny rail, this allows any many options of optic and positions.
I have a Sightron STac 30mm on mine and it all site well on the rifle
Hi lads sorry for the delay in replying, thank you for all your input I appreciate it cheers, I did get the proper 30mm sportsmatch for rapids as the scope is a vector, I have actually got the rail too so will have to have a play to see what works best. Cheers Anthony for the offer Ill keep those in mind.
atb Tim.