Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Fokke Mol on April 08, 2022, 10:15:32 PM

Title: My Rapid MKI in .25
Post by: Fokke Mol on April 08, 2022, 10:15:32 PM
G`d evening gents,

i finally got my hands on a Theoben PCP. A Rapid MKI in.25 A burden has fallen off my shoulders.

For years and i`ve been shooting Mattie from Zwolle, he always was accompanied with one or more Rapids.  Having a household and all that kinda things i never had the money to buy me one. Just too bloody expensive and over here in the Low Lands second hand Theoben Rpids were scarse and still expensive. But tables turned an now`s my time buy (a bit bended quote from 'All over now' from the Stones).

Like i`ve said earlier, i know nothing about Theoben PCP`s, people told me this is a MKI, it`s not regulated and the fish sclae stock isn`t an original one. I don`t give a hoot. I sot it once in my backyard. The lady next door started swearing because the sot startled her.

I made some pics.

The serial number.
(https://i.postimg.cc/c47WsZky/20220408_234052.jpg) (https://postimg.cc/qz7Swfdj)

(https://i.postimg.cc/1z3sCTHx/20220408_233813.jpg) (https://postimg.cc/xXhwq6hg)

(https://i.postimg.cc/QC13KrX7/20220408_233828.jpg) (https://postimg.cc/zHzM46HD)

(https://i.postimg.cc/9QJj7bjL/20220408_233905.jpg) (https://postimg.cc/dhkXM83C)

Maybe somebody can give me some extra info.

Cheers.

Fokke Mol
Title: Re: My Rapid MKI in .25
Post by: KevG on April 09, 2022, 12:47:13 AM
very nice,looks like a standard early stock that been re finished, who ever as done it as done a great job.
KevG
Title: Re: My Rapid MKI in .25
Post by: Ca_Varminter on April 09, 2022, 01:20:59 AM
With the Serial Number of 009083
It was made in Sept. 1999.
According to Theoben's Date chart..

Stuart
Title: Re: My Rapid MKI in .25
Post by: Fokke Mol on April 09, 2022, 09:29:26 AM
Hi,

nice to get to know more about the gun. Thank. If i want a quick fill for it, do i have to modify the stock? I rather wouldn`t want to do that.

I`m gonna take in the backyard later today, i wanna know how much 'purry' there is in this gun. 'Purry' is Dutch slang for power or energy.

Thanks.

Cheers. Fokke Mol
Title: Re: My Rapid MKI in .25
Post by: Fokke Mol on April 14, 2022, 05:17:32 PM
Hi,

made my own quick fill. I`d rather buy a spare botle than ruin the stock. The bottom of the bottle has enuff thickniss to put 1/8 BSP in, a one way Foster male does the trick.
(https://i.postimg.cc/KvHVysFh/20220412_211510.jpg) (https://postimg.cc/0b7ZYnbV)

The pellet velocity is rather low, some 236 m/s (774 fps) but the gun is very acurate. I shot the gun at the 100 meter range at Noarderloft en the grouping was okay. Pellets were 25, something grain by JSB. I would like to add some 30 m/s or  90 fps to the velocity. See if i can do that.

(https://i.postimg.cc/JhGB3NRc/20220413_202155.jpg) (https://postimg.cc/kVP4qt6B)
Title: Re: My Rapid MKI in .25
Post by: angrybear on April 15, 2022, 12:50:23 AM
Sorry to be blunt but only a total idiot would fit or use a home made quickfill like that.
You have now voided the safety test on the bottle, and if they have any sense no range should allow that on to their premises.  :o :( :(
Title: Re: My Rapid MKI in .25
Post by: Fokke Mol on April 15, 2022, 06:26:14 AM
Hi,

don`t mind anyone being blunt. Tell me why this should not be allowed? The thickness of the bottom from the bottle is enough, what is the difference between a Foster in the bottle and a Foster in the front end of a gun like a Daystate Huntsman or a Foster in a round professionally made Quick Fill? My QF has more thread than de QF on my Logun S16s or my BSA S10.

I know what i am doing for as far as making a thread in this bottle. I`ve been working a lathe for 12  years professionally, i know something about working with hi pressure.

Best. Fokke Mol
Title: Re: My Rapid MKI in .25
Post by: Aggy on April 15, 2022, 07:20:05 AM
Several manufacturers fit quick fills in the bottle of the cylinder even Theoben did at some point I believe
Title: Re: My Rapid MKI in .25
Post by: angrybear on April 15, 2022, 01:59:39 PM
Quote from: Fokke Mol on April 15, 2022, 06:26:14 AM
Hi,

don`t mind anyone being blunt. Tell me why this should not be allowed? The thickness of the bottom from the bottle is enough, what is the difference between a Foster in the bottle and a Foster in the front end of a gun like a Daystate Huntsman or a Foster in a round professionally made Quick Fill? My QF has more thread than de QF on my Logun S16s or my BSA S10.

I know what i am doing for as far as making a thread in this bottle. I`ve been working a lathe for 12  years professionally, i know something about working with hi pressure.

Best. Fokke Mol

Simply because the bottle is not designed to have a hole drilled in the bottom.
ANY modification to the bottle instantly invalidates the pressure test, which makes using it a breach of whatever national/international rules apply to your country.
Any professionally made pressure tube QF etc will have been pressure tested before being allowed on sale.

You might know how to cut a thread, but you certainly don't know "what you're doing" or you would not have done it,
oh & I spent 22 years in the RAF working with HP gasses including LOX/LIN production  ;)

Aggy, not like that they don't.