Print Page - Slow acting reg

Title: Slow acting reg
Post by: alan1 on February 19, 2022, 04:34:17 PM

Hi I've just serviced my reg and on setup it's slow reacting after 1300 psi to get to 1400 or 1500 pis any ideas please

Title: Re: Slow acting reg
Post by: KevG on February 19, 2022, 05:02:31 PM

sealing face on the piston core/rear of push pin disc,check these for any damage no matter how slight, also oring behind push pin disc
KevG

Title: Re: Slow acting reg
Post by: Ca_Varminter on February 19, 2022, 05:21:20 PM

Since you have the push pin disk out.
Check the tiny air passage for any debris?
Give a shot of compressed air for good measure.

Stuart

Title: Re: Slow acting reg
Post by: angrybear on February 19, 2022, 05:44:20 PM

Make sure there's plenty of pressure in the bottle, that can really screw reg setting :-[

been there, done that. ::)

Title: Re: Slow acting reg
Post by: alan1 on February 20, 2022, 11:44:38 AM

OK thanks what's best end float distance

Title: Re: Slow acting reg
Post by: KevG on February 20, 2022, 01:38:08 PM

as long as you have slight travel thats fine but no more than 1mm
kevG

Title: Re: Slow acting reg
Post by: alan1 on February 20, 2022, 03:41:44 PM

Thanks again

Theoben Rapid Forum