Text only | Text with Images

Theoben Rapid Forum

Everything Technical About Rapid => Technical => Topic started by: Maxwell on February 15, 2022, 03:20:44 PM

Title: Mk1 rapid steel exhaust valve white seal
Post by: Maxwell on February 15, 2022, 03:20:44 PM
Can any one tell me where I can get the white seal that fits inside the mk1 steel exhaust valve.
Thanks Les
Title: Re: Mk1 rapid steel exhaust valve white seal
Post by: Ca_Varminter on February 15, 2022, 04:31:37 PM
I believe all the existing supplies have been exhausted.
You can either replace it with a black Delrin valve-body...
Or you might be able to Make a new white seal....
The expert on this is KevG.. give him a ring!

Good Luck,
Stuart
Title: Re: Mk1 rapid steel exhaust valve white seal
Post by: nevadacowboy on February 15, 2022, 04:41:08 PM
If the seal is still in the valve you could try dropping the whole valve in boiling water which softens the seal then tighten causing the seal to extrude a bit more.
Text only | Text with Images