Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: KCE on May 26, 2020, 08:04:07 PM

Title: Mk1 block.
Post by: KCE on May 26, 2020, 08:04:07 PM
How far have you gone with your Mk1 Block.
I have to date had the following fitted so far.

Silent pip.
Matched spring set.
New cocking dog.
Pre chamber.
Full set of seals.
All the above work done by Kevg.

Looking into double tap inertia now and may be a reg.

The benefits to date are far better shot count/smother action/much quieter and better accuracy and the added bonus of knowing that all work done was a by a very competent very knowledgeable chap and no short cuts were taken.
Thank you kevG.
Title: Re: Mk1 block.
Post by: Squinty on May 26, 2020, 10:23:42 PM
my 'Mk1'  is a Rapid 7  ;)
It was originally tuned and set up by Ian Collins ex-AWT. Made 38ft with 16gr pellets
Its 45* back ported, apart from a Bucketboy valve its as it was...kinda

Fitted a late adjustable bolt, polished the hammer, polished the trigger faces. The sears had already been sharpened up by Ian Collins.
Still running a fairly short almost sub-12 hammer spring.

Stripped and reassembled until I was happy...like 2000 shots of chrono and pellet tests before I was happy to be out lamping.
Yes I still use a red lamp. ;D

In the sweet zone it's good for/ often better than +/- 5fps shot to shot  and 15fps spread at 35ft.

Block plans...always thinking so...try a different valve, probably the DT as I'm thinking stiffer exhaust spring.
I have a 6 hole mk2 fast-flow to try as the current R7 one has 4x 2.5mm holes ....which I think might help baffle a bit of ping.
Also gain a ittle bit of block volume from being 15mm longer.

Kev converted some BSA bottle valves for me in the AWT high-flow style that were previously fitted, it flows enough for mid-40s.

(https://i.imgur.com/RYYJr8m.jpg)

Would like to convert to mk2 barrel location ...check top port size, its been opened up buuuut maybe needs a tad more.

Dreams tbh. Mk4 trigger would be great but even for my 'forever keeper' not a justifiable expense ...maybe.
Deepen the lower chamber; reg n pre-chamber...only if I could get a very fast follow-up shot.
Title: Re: Mk1 block.
Post by: KCE on May 27, 2020, 11:06:54 AM
Sounds a very nice set up squinty.
Feel free to upload images of that out fit on here.
Title: Re: Mk1 block.
Post by: Squinty on May 27, 2020, 12:15:01 PM
As it was in 2006, believe a 24" BSA barrel , long AWT mod , Leupold Vari-X-111

(https://i.imgur.com/oCCIoXf.jpg?1)

As it is now... unchoked 22" LW, A&M   :-\ :-X , spare stock, Vortex

(https://i.imgur.com/aMxz0fO.jpg)

inbetween its had a 21.5" LW , a second 22" LW, 2x shorter AWT mods,  HW mod ;)
And worn MTC, Optisan, Tasco, Hawke...
Title: Re: Mk1 block.
Post by: KCE on May 27, 2020, 12:27:09 PM
Very nice.
And all these years down the line your faithful rapid still never lets you down when in the field.
Title: Re: Mk1 block.
Post by: Squinty on May 27, 2020, 01:44:33 PM
it was a shared gun, my father bought it in 03, he was a pest controller and we shot prime rabbit perms together for years.
Five or six nights a week..75-100+ rabbits a night. Under 50 wasn't worth the time.

Dad had retired in 06 put the Leup on it, might have been tempted by the 24" BSA barrel from AWT.
He would have liked a couple of years earlier when it was built.

2011-12  I was doing a lot of carp camping -it all went tits-up.

Every possibility father might have dropped it, theres a bent Optisan in the loft. ( yet another gun off the bonnet or the roof of the car ::) )
The mod clipped and blew its baffles but it went back to a monster choked LW and the shorty AWTs.

Spent a couple of years in the cabinet as the old boy lost mobility and we stopped shooting beyond the odd bit of orchard pest control and a half gun of walked up pheasant.

I inherited full ownership in 2016, before then if I rattled the cabinet keys the old boy was lined up at the door with three spaniels.
Anyway it wasn't truely accurate any more, consistent...not. The barrel was tatered.

Bucketboy gave me a strip-down tutorial and I don't think I've been 100% happy since  ;D ;D
more power-more shots-more consistency-not quiet enough-pellets not good enough.....and back again.

Kevs said it, BBs said it...once you change something on a Rapid ...its a different gun altogether.
When you're treated to a virtually silent 40ft/lbs rapid ... you get fussy bout the little things.
Title: Re: Mk1 block.
Post by: Daztilley on May 28, 2020, 05:56:05 PM
It's great to hear about the history of a mk1 - how it's been used and fettled over the years
The basic design has stood the test of time and with a few improvements can be made into something quite special 👍👍👍
Title: Re: Mk1 block.
Post by: MMA player on June 03, 2020, 02:00:41 PM
Ian collins was the godfather of rapid tuning...before he got framed by the old bill

I am fortunate to have one of his blocks and BSA barrels

The AWT was easily the best you could get back in the day...though the big ones used to catch the wind a bit
Title: Re: Mk1 block.
Post by: colin g on June 04, 2020, 08:13:08 PM

Ian Collins, Not heard that name for a long while,  Anyone know how he is doing and what he is up to now..  Col.
Title: Re: Mk1 block.
Post by: Squinty on June 05, 2020, 08:33:00 PM
I spoke to Ian three years ago and it took 6 months to get hold of him in a roundabout way.
Title: Re: Mk1 block.
Post by: KevG on June 06, 2020, 12:35:43 AM
smashing bloke ian,could talk to him for hours.not heard from him in a long time,or his m8 don cambell (donnyc)
KevG
Title: Re: Mk1 block.
Post by: Daztilley on June 06, 2020, 05:22:30 AM
Now theres a couple of blasts from the past!!
Remember DonnyC from the old forum 👍
Title: Re: Mk1 block.
Post by: anthony on January 26, 2021, 05:18:09 PM
I chatted to donny few weeks ago and he's not good at the moment hope you on the mend soon don.     
and as for ian i have spoken to him for about year or so.

Title: Re: Mk1 block.
Post by: anthony on January 26, 2021, 05:26:24 PM
just released how old this post is  :-[
Title: Re: Mk1 block.
Post by: Adymorris on March 02, 2021, 08:28:36 AM
I remember Ian Collins from years back, I'm sure he was the guy who theoben has listed as their contact for support questions  on their gas ram conversions, what happened with the old bill?
Title: Re: Mk1 block.
Post by: Squinty on March 02, 2021, 09:29:55 AM
Quote from: Adymorris on March 02, 2021, 08:28:36 AM
I remember Ian Collins from years back, I'm sure he was the guy who theoben has listed as their contact for support questions  on their gas ram conversions, what happened with the old bill?

From what I heard Ian was also theobens go to man for 'difficult' rapids that wouldn't tune up.

As I remember the charges for unlicensed firearms were eventually dismissed under appeal but the ammunition charge was upheld.
Title: Re: Mk1 block.
Post by: Billyboy on March 07, 2021, 07:51:45 AM
As said Ian was/ is a top bloke..
He's still about but not tinkering anymore
Title: Re: Mk1 block.
Post by: anthony on March 07, 2021, 02:58:04 PM
Quote from: Adymorris on March 02, 2021, 08:28:36 AM
I remember Ian Collins from years back, I'm sure he was the guy who theoben has listed as their contact for support questions  on their gas ram conversions, what happened with the old bill?

yes he was the contact for support gas ram conversions  and he was i was done up like a kipper by the old bill