Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: KevG on February 08, 2022, 10:39:19 PM

Title: Ben Taylor, smooth twist barrels
Post by: KevG on February 08, 2022, 10:39:19 PM
been talking to Ben Taylor and he is selling smooth twist barrel blanks if anyone is interested, they are at a bargain price of only £20.they will need sleeving to fit the rapid action.he also as a few other bits he is of loading.
KevG
Title: Re: Ben Taylor, smooth twist barrels
Post by: Tim_B on February 09, 2022, 07:05:21 AM
How do you get hold of him Kev?    Could be interested - my Mk1 Wildcat was smoothtwist and very accurate.....bargain at £20.
Title: Re: Ben Taylor, smooth twist barrels
Post by: nevadacowboy on February 09, 2022, 10:46:29 AM
I maybe interested in one of these depending on calibre.  Any idea what other bits he is moving on. Ask him to sell on the sales thread.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Andycoup on February 09, 2022, 01:22:49 PM
I'm definitely interested in the barrels, maybe some other bits too.

Did he say what calibre they are Kev?
Title: Re: Ben Taylor, smooth twist barrels
Post by: alan1 on February 09, 2022, 04:13:38 PM
I would would a177 barrel
Title: Re: Ben Taylor, smooth twist barrels
Post by: alan1 on February 09, 2022, 04:31:17 PM
I mist  like off
Title: Re: Ben Taylor, smooth twist barrels
Post by: bengarzy on February 09, 2022, 08:27:16 PM

There is between 50-100 new ST barrels in .22, there maybe a few .177, I have been retro fitting these barrels for the last few years and the results have been superb.
Since the popularity of slugs in FAC we have found even more potential in them and as I am now retired and need to clear the decks of Rapid stuff they are for sale at a knock down price.
Email me if you are interested, carriage will obviously be extra at this low price.
I also have stock of AA S410 light weight long stroke hammers, fit and forget, they give 40% more shots with an extremely flat power curve as you can fill to 200 BAR and straight in at full 11.8 ft energy. They run on PTFE bearings so don't clag up like the standard hammer after a short time.
Cheers
Title: Re: Ben Taylor, smooth twist barrels
Post by: Andycoup on February 09, 2022, 08:51:20 PM
Mail sent.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Squinty on February 09, 2022, 09:26:29 PM
more mail :)
Title: Re: Ben Taylor, smooth twist barrels
Post by: KCE on February 09, 2022, 09:40:06 PM
Mail sent.

Regards kev.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Therapidman on February 09, 2022, 10:37:17 PM
Pm sent
Title: Re: Ben Taylor, smooth twist barrels
Post by: angrybear on February 10, 2022, 01:13:38 AM
Yep PM sent for at least one .22 barrel, do we know are they all the same length ?
Title: Re: Ben Taylor, smooth twist barrels
Post by: Tim_B on February 10, 2022, 07:13:43 AM
awesome Ben.

Mail sent.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Budder on February 10, 2022, 09:14:42 AM
Great stuff  Ben!
mail sent
Title: Re: Ben Taylor, smooth twist barrels
Post by: alan1 on February 10, 2022, 11:22:53 AM
Mail sent
Title: Re: Ben Taylor, smooth twist barrels
Post by: nevadacowboy on February 10, 2022, 11:33:35 AM
You have pm.
Title: Re: Ben Taylor, smooth twist barrels
Post by: bengarzy on February 10, 2022, 04:17:46 PM
Quote from: Tim_B on February 10, 2022, 07:13:43 AM
awesome Ben.

Mail sent.
You get my vote if you have a Dalmatian, I've had 3 over the last 40 years, Maisy is 15 and still going strong👍🏻
Title: Re: Ben Taylor, smooth twist barrels
Post by: Tim_B on February 10, 2022, 04:24:54 PM
15 - wow.  Thats an age for sure.
Title: Re: Ben Taylor, smooth twist barrels
Post by: anthony on February 13, 2022, 12:57:29 PM
sent you pm ben  and thanks for the heads up kev  ;)
Title: Re: Ben Taylor, smooth twist barrels
Post by: Andycoup on February 13, 2022, 01:37:02 PM
Quote from: anthony on February 13, 2022, 12:57:29 PM
sent you pm ben  and thanks for the heads up kev  ;)

As Ben has said in the other post, you are better texting him on the number in that thread. (It's a few lines under this one) ;)

Andy.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Tim_B on February 14, 2022, 10:20:26 AM
Got to agree - texting was much faster  8)
Title: Re: Ben Taylor, smooth twist barrels
Post by: bengarzy on February 15, 2022, 10:57:15 PM

I can find no way to to reply to my incoming private mails
Sooooo try [email protected]
Cheers
Title: Re: Ben Taylor, smooth twist barrels
Post by: Ca_Varminter on February 16, 2022, 12:27:12 AM
Quote from: bengarzy on February 15, 2022, 10:57:15 PM

I can find no way to to reply to my incoming private mails

Sorry about that...
Too many people were just signing up to harass KevG......
Sort of like laughing at the chimpanzees at the Zoo......
Anyway I denied the ability to send PM's until you reached 5 posts on our site..
So you Have, you are Good to Go!!
So you should Now have the ability to Reply to any Private message/mail..

Stuart
Title: Re: Ben Taylor, smooth twist barrels
Post by: anthony on February 17, 2022, 08:38:46 AM
Quote from: bengarzy on February 15, 2022, 10:57:15 PM

I can find no way to to reply to my incoming private mails
Sooooo try [email protected]
Cheers

pm and email sent ben
Title: Re: Ben Taylor, smooth twist barrels
Post by: Therapidman on February 22, 2022, 05:31:03 PM
Has anyone who bought a barrel received one yet
Title: Re: Ben Taylor, smooth twist barrels
Post by: Mickyd on February 22, 2022, 07:28:14 PM
Mine was posted today, I've no doubt Ben has been busy. Md
Title: Re: Ben Taylor, smooth twist barrels
Post by: Tim_B on February 22, 2022, 08:20:23 PM
I did say to Ben there was no rush, so I'll get mine when I get it......he had a bit on last week I think, plus he probably wants to do them all at similar times to save trips tot he post office.
Title: Re: Ben Taylor, smooth twist barrels
Post by: nevadacowboy on February 23, 2022, 12:09:08 AM
Ben told me it was a 60 mile round trip for him to where the goods are stored and he only goes once a week. He will get to your order eventually so,  be patient.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Mickyd on February 23, 2022, 08:43:11 AM
My barrel came this morning, thanks Ben.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Andycoup on February 23, 2022, 10:38:39 AM
Mine arrived this morning too.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Dave74 on February 25, 2022, 07:05:44 PM
Received mine .many thanks
Does anyone know if these are rifled all the way as they look like it to me,and what end would be the block end thin end I assume?
Title: Re: Ben Taylor, smooth twist barrels
Post by: Dave74 on February 26, 2022, 12:04:58 AM
Ok found out these are 3? of impressed rifling on the reduced end 👍
Title: Re: Ben Taylor, smooth twist barrels
Post by: Tim_B on February 28, 2022, 07:03:21 AM
They are smooth twist so will only have a couple of inches at rifling at the stepped end.  At least the ones I rec'd were.

I also got some titanium valves and some S400 hammer's.......he's a good salesman   ;D ;D
Title: Re: Ben Taylor, smooth twist barrels
Post by: nevadacowboy on February 28, 2022, 03:10:43 PM
What gun were the titanium valves for.
Title: Re: Ben Taylor, smooth twist barrels
Post by: Tim_B on March 01, 2022, 09:54:45 AM
Rapids  ;D
Title: Re: Ben Taylor, smooth twist barrels
Post by: alan1 on March 07, 2022, 12:21:45 PM
The reduced end is where the riferling is. I've got 2 177 on test now one on rapid one on my kral jumbo the riferling is like a choke and it takes some force to push the pelet through and may need a good polish,? As it drops the feet a lot so have to compensate. There's a video on utube witch shows them being made at fx factory and tested
Title: Re: Ben Taylor, smooth twist barrels
Post by: Buzz20 on March 14, 2022, 01:49:27 PM
kev intrested can you machine barrell and screw cut it for me want 19" if avavalble let me know how much and ill transfer money tommorow
cherres pal
🐝👍🏻
Title: Re: Ben Taylor, smooth twist barrels
Post by: bengarzy on April 28, 2022, 10:34:49 PM

Well thank you all who bought barrels and other parts from me, all gone except the AA hammers now.
There may be a few of you that have not had your cheques cashed....... my fault, my bank wouldn't honour them as they were to Ben Taylor and that account is now closed and they should have been made out to H Taylor. Never mind anyway the majority I could get changed or re sent.
Hope the barrels are as good as they tested at Milbro
Ben
Title: Re: Ben Taylor, smooth twist barrels
Post by: Cambelski on May 02, 2022, 06:14:46 PM
Hi Ben

I would like an airarms 410 hammer if they are still available please.

Cheers
Title: Re: Ben Taylor, smooth twist barrels
Post by: Mickyd on June 02, 2022, 04:14:31 PM
Just like to say a big thanks to kevg,as he's just fit my s/t barrel to my rapid great job as usual 👍.  Md
Title: Re: Ben Taylor, smooth twist barrels
Post by: Kernal on June 02, 2022, 04:23:10 PM
Just on a personal note!

I think Theoben & Ben Taylor would be proud of our KevG to how much time and effort this guy has put into helping so many people with problems with the Theoben Rapid Range, And this is why this forum was built.

With people like DrBob creating new fantastic products to help us all with our Theoben`s & KevG & also Ca_Varminter with all his fantastic help and support to help us all understand how & what we can all do to fix so many problems to our Theobens.

Hats off to them all i say and lets all hope the future is on this forum with the best support to all members that not only join us but have stayed with us for all this time .

Thankyou.

Title: Re: Ben Taylor, smooth twist barrels
Post by: Mickyd on June 02, 2022, 04:32:56 PM
👍
Title: Re: Ben Taylor, smooth twist barrels
Post by: smithy123 on June 02, 2022, 08:28:46 PM
Hi all, does anyone know if there is any of these barrels still available?
Title: Re: Ben Taylor, smooth twist barrels
Post by: KevG on June 02, 2022, 09:31:10 PM
sure all those that ben had have all been snaped up
KevG
Title: Re: Ben Taylor, smooth twist barrels
Post by: Budder on June 03, 2022, 08:06:37 AM
There is a guy on mewe that bought a load off Ben, he said the other day he had some left in 22. Think he is on the other forum,username nemo.
Title: Re: Ben Taylor, smooth twist barrels
Post by: angrybear on June 03, 2022, 10:52:17 AM
Yep Nemo1966 on the R7OC, bought every last item Ben had left for sale.
Has to be said his machined up, carbon sleeved, finished barrels do look rather nice.
Title: Re: Ben Taylor, smooth twist barrels
Post by: smithy123 on June 03, 2022, 07:54:12 PM
Is he selling them mate
Title: Re: Ben Taylor, smooth twist barrels
Post by: Budder on June 03, 2022, 08:35:01 PM
Quote from: smithy123 on June 03, 2022, 07:54:12 PM
Is he selling them mate
yes he is/was, said he only has .22 left. He is on mewe theoben owners as Robert Shaw or on the rapid forum as nemo. He cleared Ben Taylor out of all his remaining Theoben stuff, scope mounts, regs, barrels and titanium valve stems.