Print Page - Rapid mk2 Regulator seals

Title: Rapid mk2 Regulator seals
Post by: Rapid7bee on December 17, 2021, 12:34:16 PM

Hi,can someone tell me the size of the seals I require to sort my Rapid 7 mk2,I purchased bs005 and bs008 but are both oversized. Any ideas.

Title: Re: Rapid mk2 Regulator seals
Post by: Daztilley on December 17, 2021, 01:28:14 PM

https://rapidforum.co.uk/forum/index.php?topic=29.0

Have a look here mate 👍

Title: Re: Rapid mk2 Regulator seals
Post by: Daztilley on December 17, 2021, 01:34:13 PM

A closer look at your photo shows the core is different to a theoben factory core

Title: Re: Rapid mk2 Regulator seals
Post by: Daztilley on December 17, 2021, 01:43:05 PM

Is yours the same as this?
With the core held in by an internal circlip?

They were a very early design as the end float is fixed.

Title: Re: Rapid mk2 Regulator seals
Post by: Rapid7bee on December 17, 2021, 02:10:05 PM

Hi Daztilley,yes its exactly like that. Its an early mk2.do you know what size seals I require?

Title: Re: Rapid mk2 Regulator seals
Post by: Daztilley on December 17, 2021, 02:36:44 PM

I'm sorry ..... I don't know what the seal sizes are for the early regulator- I'm sure kev g will know 👍

Title: Re: Rapid mk2 Regulator seals
Post by: Squinty on December 17, 2021, 04:32:17 PM

possibly... but will need confirmation

7 x1 and 4x1

Theoben Rapid Forum