Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: KevG on November 18, 2021, 01:58:09 PM

Title: not sure about this one
Post by: KevG on November 18, 2021, 01:58:09 PM
rapid versus HGV
KevG
Title: Re: not sure about this one
Post by: KevG on November 18, 2021, 02:00:32 PM
KevG
Title: Re: not sure about this one
Post by: Ca_Varminter on November 18, 2021, 03:25:35 PM
What Happen??
OMG...
??? ??? ??? ??? ??? ??? ??? ???

Stuart
Title: Re: not sure about this one
Post by: KevG on November 18, 2021, 03:35:21 PM
someone left it on the roof of their jeep and drove of.fell onto road and a lorry drove over it.he is gutted as he as owned it for 25 years from new.
KevG
Title: Re: not sure about this one
Post by: nevadacowboy on November 18, 2021, 03:53:24 PM
OUCH! That hurts. Will you be able to save it?
Title: Re: not sure about this one
Post by: maxtich on November 18, 2021, 04:30:05 PM
Nothing that our Kev can't fix 👍
Title: Re: not sure about this one
Post by: KevG on November 18, 2021, 06:00:51 PM
worse damage to block was the scope mounts ripped out of block.re drilled and threaded to m7 0.75 and made threaded sleeves with 2ba internal threads.barrle to bent to sort out.
KevG
Title: Re: not sure about this one
Post by: Ca_Varminter on November 18, 2021, 06:08:05 PM
Good Man, KevG!!!
Saved another Rapid from the Trash Bin!!
Glad to see this Poor Rapid is in Good Hands....

:) :) :) :) :) :) :) :)
Stuart
Title: Re: not sure about this one
Post by: KevG on November 18, 2021, 06:09:57 PM
block as a few dings on it.was a bit scared to pressure it up to be honest😁
KevG
Title: Re: not sure about this one
Post by: Ca_Varminter on November 18, 2021, 08:14:01 PM
Well if you want to be cautious about pressurizing it..
You can use hydraulic pressure to test it!
A lot safer since fluids don't compress!!
So rather than a Bang... more of a pop!
This is if You have access to hydraulic equipment!
Chip did this when he test his Titanium receivers.
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/DSC02223.jpg)

Stuart
Title: Re: not sure about this one
Post by: KCE on November 18, 2021, 10:32:17 PM
Ouch.
A real shame that is indeed.
Im sure you will be able to sort most of it out.
I am sure I may have a mk1 stock here he can have for free if any help to him.
Give me a call tomorrow let me know.

Regards kev.
Title: Re: not sure about this one
Post by: KevG on November 18, 2021, 11:18:51 PM
cheers for the offer kev .much appreciated m8.but he picked it up tonight, he had a spare stock for it.just hope it shoots ok.
KevG
Title: Re: not sure about this one
Post by: GB2017 on November 19, 2021, 08:09:16 AM
Nowt some duct tape wont fix

and if it doesn't then you obviously need more duct tape
Title: Re: not sure about this one
Post by: KevG on November 19, 2021, 01:38:08 PM
Quote from: Ca_Varminter on November 18, 2021, 08:14:01 PM
Well if you want to be cautious about pressurizing it..
You can use hydraulic pressure to test it!
A lot safer since fluids don't compress!!
So rather than a Bang... more of a pop!
This is if You have access to hydraulic equipment!
Chip did this when he test his Titanium receivers.
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/DSC02223.jpg)

Stuart
just normally do it the Yorkshire way Stuart m8.gloves and safety glasses and fingers in the ears😁
KevG
Title: Re: not sure about this one
Post by: Ca_Varminter on November 19, 2021, 05:07:05 PM
Just be very careful......
Remember the late owner of GinB Stocks
He was holding a air cylinder when it "Exploded"

That is why they use water to test scuba tanks!!!
Liquids don't compress. So if a failure happens.. There is no Explosive event!!

Stuart
Title: Re: not sure about this one
Post by: Paul Armstrong on February 14, 2024, 03:57:16 PM
Quote from: Ca_Varminter on November 18, 2021, 08:14:01 PMWell if you want to be cautious about pressurizing it..
You can use hydraulic pressure to test it!
A lot safer since fluids don't compress!!
So rather than a Bang... more of a pop!
This is if You have access to hydraulic equipment!
Chip did this when he test his Titanium receivers.
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/DSC02223.jpg)

Stuart
titanium block ,bet that's fun to work with
Title: Re: not sure about this one
Post by: P13 Shooter on March 04, 2024, 03:29:15 PM
I feel for the guy , he must have been gutted.
Title: Re: not sure about this one
Post by: Higgleplog on April 03, 2024, 09:40:01 AM
The stuff of nightmares.Ive done it with folders and a briefcase before, which i didnt own,but your gun,nooo.