Theoben Rapid Forum

DrBob`s products & parts => Dr Bob's Section => Topic started by: Dr Bob on November 04, 2021, 04:30:48 PM

Title: Looks like I'm going to be doing mags for a while yet
Post by: Dr Bob on November 04, 2021, 04:30:48 PM


Theobens original spring manufacturer can't supply the mag springs due to a machine breakdown. This machine was made in America and the order I put in a few months ago couldn't be filled as they are still awaiting parts. So I called in at Airedale Spring Ltd of Haworth as it's just down the road from me. Their price was a bit of a shock to say the least! £250.00 for set up costs!!!!
So I had no option but to buy 500. Looks like I'm going to be doing mags for quite some time to come yet so your 5 year guarantee is safe.  ;) ;) ;) ;)
Title: Re: Looks like I'm going to be doing mags for a while yet
Post by: Ca_Varminter on November 04, 2021, 04:43:57 PM
Hi Dr Bob,

Your new Machining techno-wiz should have been able to make them on the lathe with the right mandrel dia.!
With all those barrel index screws he did......he wouldn't  even breaking a sweat!

I hope you and Fran are Well and Staying Safe!

That Yank from across the Pond!
Stuart
Title: Re: Looks like I'm going to be doing mags for a while yet
Post by: Dr Bob on November 04, 2021, 05:09:52 PM

My new Tec wiz is on his way down to the south of England to pick up a new machining centre :) I did get the wire just in case, but both mine and his time are better spent on other projects. Dr Bobs Gun Bit's just went up a gear. ;)

Bob
Title: Re: Looks like I'm going to be doing mags for a while yet
Post by: Ca_Varminter on November 04, 2021, 05:52:58 PM
No where to go but UP!!!
So it sounds like thing are running like a Well Oiled Machine!!!!
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

Looking forward to the new Bits Both of you come up with!!

Stuart
Title: Re: Looks like I'm going to be doing mags for a while yet
Post by: The Robin on November 04, 2021, 05:58:48 PM
Superb, it's always good to hear what's happening and I'm looking forward to seeing what else your getting upto  8)
Title: Re: Looks like I'm going to be doing mags for a while yet
Post by: Dr Bob on November 05, 2021, 11:29:40 AM
The idea is to get me off production and back on to R&D. I'm going to have to keep him busy to bridge the gap now he has made the leap of faith becoming self-employed. Our next project will be to see if we can adapt the HW 100 buddy bottle conversion to fit the Air Arms S200. ;)  The Vendetta is also on the list, I need to clear the waiting list and take the lessons learned from dealing with large company's and can now do an approved prototype before a batch. Previously set up costs with large companies have made this financially impossible.
No more travelling up and down the motorway to companies to sort out a problem they have, and then I get a consultation bill!!

Health and family problems plus Covid have taken its toll over the last few years. Hopefully this new to us machining centre is  the start of the upturn ( cost me my classic bikes :'(). It holds 8 tools in the turret it's a collet chuck up to 25 mm. It also has a tailstock facility . Subject to Alex's inspection, that is.

I'll start a new thread on it to keep you all posted.

Bob

Title: Re: Looks like I'm going to be doing mags for a while yet
Post by: GB2017 on November 06, 2021, 08:21:01 AM
at least you should have a spring (or 500) in your step now  ::)