Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: nevadacowboy on September 30, 2021, 12:59:27 PM

Title: Rapid Scope Mounts
Post by: nevadacowboy on September 30, 2021, 12:59:27 PM
Were all rapid scope mounts made to the same height or did they come in low, medium and high. I ask as the ones I have all seem to be the same height and I have to use half moon risers or riser blocks to raise them.
Title: Re: Rapid Scope Mounts
Post by: Ca_Varminter on September 30, 2021, 02:38:40 PM
Yes....
That is why they made those ugly Hlf-moon riser blocks...
That is why I made my own riser blocks that mount between the receiver and scope rings!
(https://photos.imageevent.com/scl_electronics/gun/air/websize/scope%20riser.jpg)

Until I went to machining my own Picatinny rails!
(https://photos.imageevent.com/scl_electronics/gun/air/websize/newmounts.jpg)

Good Luck,

Stuart
Title: Re: Rapid Scope Mounts
Post by: nevadacowboy on September 30, 2021, 04:18:47 PM
Nice work but unfortunately I do not have the skills or machinery to make my own.