Hi All
what options are available to change the trigger on the mk4 blocks to something, shall we say a bit more refined
tia
maybe a RAW its series 4 bit more refined or so they say..my self i can not feel the difference.whats wrong with yours.normaly very good when set up right
KevG
nothings wrong as such, just wondered if there were better trigger blades out there that could be fitted
Rowan engineering do blade upgrades.
KevG
thanks will have a look
I have never had any problems with my MK4 Triggers...
Here is one of my MK4's.
With one of my custom milled trigger arm with an Anschutz adjustable trigger.
Also with custom hand fitted and polished brass spacers.
(https://photos.imageevent.com/scl_electronics/gun/air/websize/Mark4-tirg1.jpg)
(https://photos.imageevent.com/scl_electronics/gun/air/websize/Mark4-tirg2.jpg)
Stuart
thats the sort of thing I am after
I have a couple of Rapids with mk4s, the early mk4 blade isn't the prettiest and I was initially pleased to get one one with the later unit.
But to be honest I've been struggling to get comfortable with the wider set-back. Had one of these on my shopping list for ages.
https://rowanengineering.com/products24.htm#theobenadjtrigger
Well if you have Access to the early Stick Trigger on the MK4.
Here is my First version of my trigger using the Anschutz unit..
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/new-trigger2.jpg)
I cut the trigger off at the bend. Drill and tapped it.
Then install a threaded 1/8"(3.175mm) rod for the Anschutz to attach to...
Stuart
The Rowan blades are great,got em on my Raw and MFR. let's you set the reach and height of the blade.
Here is the New Adjustable Blade from Anschutz....
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/20210909_162730.jpg)
Will do a full post about this when I mount it to my Ul_Ti_Mate Rapid..
Stuart
nice, I used to have a mec trigger, wished I had kept it now
Quote from: Ca_Varminter on September 10, 2021, 05:56:45 AM
Here is the New Adjustable Blade from Anschutz....
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/20210909_162730.jpg)
Will do a full post about this when I mount it to my Ul_Ti_Mate Rapid..
Stuart
looks nice butt a bit fragile or not.
Well the blade can be shifted if hit....
But in normal shooting, it be fine.
My Mark4 triggers are set to break @ about 6 to 8 ozs .
Stuarty
Is there anything that can be done to the gamo triggers.
I know about the shoes and the bearing set up but something like what you have there Stuart would be nice.
Regards kev.
Buy KevG Several Pints!!!
Set him in front of Mill....
You can mill Your MKI to fit the Mark4 trigger!!
The Person who Fitted the Mark4 trigger in my Sporter MKII
is still doing the conversion in any Rapid.... He in fact told Theoben how to Do It!!
(https://photos.imageevent.com/scl_electronics/gun/air/websize/trigger%20conversion.jpg)
If KevG Complains.... Give more beer to the Fox!!!
Stuart