Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: angrybear on August 26, 2021, 03:15:20 PM

Title: MFR Bottle
Post by: angrybear on August 26, 2021, 03:15:20 PM
So the build is almost there, just need a bottle & there lies the rub.
I was fully intending to splash out on a best fittings 300cc carbon because I happen to have an MFR valve to fit them,
But just realised they're too wide for the stock at 54mm (+/- 1.5mm)

So would anyone happen to know of a 50mm dia bottle with the M18 x 1.5 thread, before I go for a 280cc & new valve.
Title: Re: MFR Bottle
Post by: nevadacowboy on August 26, 2021, 11:17:40 PM
I have a 380cc Dr Bob MFR bottle  with valve that I would be prepared to part with. £70 posted.  Valve would be removed for posting but would be included in package.
Title: Re: MFR Bottle
Post by: angrybear on August 27, 2021, 01:38:55 AM
PM'd you on the other forum,
I'm very interested if it will fit,
so if the dia is 50mm or less, yes please.
But if the dia is over 50mm, sadly it's not going to fit my stock.
Steve
Title: Re: MFR Bottle
Post by: KevG on August 31, 2021, 10:03:05 AM
the 380cc from Bob are same diameter as 280cc.have a couple on my mfr.
KevG
Title: Re: MFR Bottle
Post by: angrybear on August 31, 2021, 10:58:49 AM
Thanks Kev,
I'd never heard of them before, but I've done the deal on it.

Considering that little more than a month ago I was perfectly happy & had no intention of ever needing to buy another Rapid,
It's coming along quite nicely  ;D ;D
Title: Re: MFR Bottle
Post by: KevG on August 31, 2021, 11:37:39 AM
yes those bottles came about because Bob got some bottle valves made and they did the wrong thread.so he found some bottles that were compatible.great idea and a nice size bottle.
KevG
Title: Re: MFR Bottle
Post by: angrybear on September 01, 2021, 12:30:33 PM
Dry build, MFR block, 19" .22 barrel & 380cc bottle.
Looks better in the thumbhole stock than the sporter
Title: Re: MFR Bottle
Post by: Kernal on September 01, 2021, 01:44:58 PM
Looks a real tidy gun that does m8, bet your very pleased with that, loving the green stock goes very well with the gun too.

8)
Title: Re: MFR Bottle
Post by: Kernal on September 01, 2021, 01:46:09 PM
Quote from: Kernal on September 01, 2021, 01:44:58 PM
Looks a real tidy gun that does m8, bet your very pleased with that, loving the green stock goes very well with the gun too.

8)

Just a quick question is the barrel blued or is it my eyes or maybe the photo ?
Title: Re: MFR Bottle
Post by: KevG on September 01, 2021, 01:51:51 PM
that looks bang on
KevG
Title: Re: MFR Bottle
Post by: angrybear on September 01, 2021, 06:51:15 PM
Quote from: Kernal on September 01, 2021, 01:46:09 PM
Quote from: Kernal on September 01, 2021, 01:44:58 PM
Looks a real tidy gun that does m8, bet your very pleased with that, loving the green stock goes very well with the gun too.

8)

Just a quick question is the barrel blued or is it my eyes or maybe the photo ?

Your eyes are fine,  :-[
the barrel came badly painted, it wiped off with thinners to reveal the blueing had been stripped, apart from where it get's clamped in the block  :o
I reblued it with "Perma blue" came up lovely but after 2-3 days had dry surface rust which when I wiped it down, left it looking a bit of a mess for the pic.

Having re-read the Perma blue instructions with a magnifying glass it says to finish with "Barricade" so I'll be re blueing it before the final build.
Title: Re: MFR Bottle
Post by: Kernal on September 01, 2021, 07:02:39 PM
Quote from: angrybear on September 01, 2021, 06:51:15 PM
Quote from: Kernal on September 01, 2021, 01:46:09 PM
Quote from: Kernal on September 01, 2021, 01:44:58 PM
Looks a real tidy gun that does m8, bet your very pleased with that, loving the green stock goes very well with the gun too.

8)

Just a quick question is the barrel blued or is it my eyes or maybe the photo ?

Your eyes are fine,  :-[
the barrel came badly painted, it wiped off with thinners to reveal the blueing had been stripped, apart from where it get's clamped in the block  :o
I reblued it with "Perma blue" came up lovely but after 2-3 days had dry surface rust which when I wiped it down, left it looking a bit of a mess for the pic.

Having re-read the Perma blue instructions with a magnifying glass it says to finish with "Barricade" so I'll be re blueing it before the final build.

We must know or have some bluing companies listed on here or even members can anyone give any pointers to help,

Title: Re: MFR Bottle
Post by: KevG on September 01, 2021, 07:36:13 PM
carbon sleeve is the easy cheap option to cover barrel to make it look tidy
KevG
Title: Re: MFR Bottle
Post by: Kernal on September 01, 2021, 08:47:07 PM
But i`v it was me KevG i would want it blued to finish off the project ,...This is a Theoben mfr we are talking about here :D
Title: Re: MFR Bottle
Post by: KevG on September 01, 2021, 09:36:07 PM
nowt wrong with a sleeve m8.make them look better if you ask me
KevG
Title: Re: MFR Bottle
Post by: angrybear on September 06, 2021, 10:52:14 PM
Oh bugger it leaks...everywhere  :-[
Title: Re: MFR Bottle
Post by: KevG on September 06, 2021, 11:40:49 PM
were are the leak points
KevG
Title: Re: MFR Bottle
Post by: nevadacowboy on September 07, 2021, 07:56:42 AM
It wasn't leaking before I removed the valve for posting and I put a new O ring on the valve body prior to posting. There may be a small o ring inside the valve body that has moved.
Title: Re: MFR Bottle
Post by: angrybear on September 07, 2021, 10:41:04 AM
Don't worry Bob the bottle itself is fine, that's about the only thing Not leaking  :o

Kev,
It probably just needs a complete re-seal, I was hoping the reg & adaptor I had were good without re-sealing them but obviously not,
the bottle seal on the push pin's leaking, as it the reg itself,
also 1 valve stem is way too loose, it was "popping" horribly with that one, the other stem is too tight, when I test fired it stuck open which I've never had before,
So I'll probably just get a new valve.
On top of that the pellet probe isn't sealing, I'd assumed it was .22 because it's 0.2mm thicker than the probe on my .20, but maybe not, (do you know the dia off hand?)
so looks like I'm going to do some more shopping at Dr Bob's, & might as well get an adjustable bolt at the same time  :-\
Title: Re: MFR Bottle
Post by: angrybear on September 15, 2021, 06:22:35 PM
I swear this sodding rifle must be jinxed  >:(

Done a complete O-ring change, fitted a Dr Bob adjustable bolt, & new valve except the valve locating grub-screw wouldn't fit, someone has changed the M3 for a 2BA, so I've had to modify that to fit, reassembled it all, hurray no leaks,

Test over the chrono it fired 2 shots around 670fps  :o then dropped to 270fps for the next 3  :'( , checked the bottle which was showing 100bar so filled it to 200bar
tested the reg & set it at 110bar (no psi on my cyl gauge) reassembled again, thought I might as well top off the bottle again, which showed reg testing had dropped it to 170bar,
so topped it off 200bar again opened the bleed & promptly dumped the contents because the bottle valve has now blown the seal  >:( >:(

The bear is not happy this evening.
Title: Re: MFR Bottle
Post by: KevG on September 15, 2021, 08:28:26 PM
if yours is the mfr reg with push pin disc  with locking grub screw it will leak with a quick fill. you need to seal the area behind the grub screw i normaly turn a very small piece of delrin down around 2mm diameter and around 1.5mm long.pop that in before grub screw then tighten down grub screw to expand delrin and make a seal
KevG
Title: Re: MFR Bottle
Post by: angrybear on September 15, 2021, 10:39:00 PM
Sorry Kev,
no quick fill on mine, it's the actual bottle valve on the 380cc that's blown this time.
Title: Re: MFR Bottle
Post by: KevG on September 16, 2021, 09:11:47 AM
sorry m8 got my wires crossed
KevG
Title: Re: MFR Bottle
Post by: angrybear on September 25, 2021, 12:06:23 PM
New seal inside the bottle valve, job done  :D