Text only | Text with Images

Theoben Rapid Forum

KevG Lathe work undertaken => kevG section => Topic started by: Squinty on August 19, 2021, 06:55:41 PM

Title: FAO Kev....Bit of barrel work ?
Post by: Squinty on August 19, 2021, 06:55:41 PM
Hi, Kev,
Phoned but no answer  I take it that you're run off your feet as usual.
Got a couple of barrels that I'd like machining.

Factory H100 barrel  in 22 that requires skimming, breech and porting.
And an LW polygon blank which needs porting and screwcut

Not in a massive must be done now rush but the HWs been gathering dust for 10 months  ;D and the LWs a recent purchase of new old stock that I need an opinion on before committing to the work.

cheers Steve
Title: Re: FAO Kev....Bit of barrel work ?
Post by: KevG on August 20, 2021, 03:51:20 AM
sorry Steve will ring you later today m8
KevG
Title: Re: FAO Kev....Bit of barrel work ?
Post by: Squinty on August 20, 2021, 05:52:58 AM
blooming heck Kev just got out of the workshop at 3am?

speak to you later

Steve
Title: Re: FAO Kev....Bit of barrel work ?
Post by: KevG on August 20, 2021, 06:02:40 PM
didn't realise how late it was😁
KevG
Text only | Text with Images